Venus Enterprises

UltraTech POWERGROUT PGM is ideal for filling tie rod hole/slit holes in concrete, joints in brick masonry and natural stones. Features and Benefits.

Ascolite Ascogrout 65 is a high-performance, non-shrink, cementitious grout specially formulated for precision grouting applications in heavy-duty industrial and structural environments. It offers excellent strength, flow characteristics, and durability, making it ideal for machine foundations, anchor bolts, base plates, and other critical grouting needs.

Designed to meet demanding construction and engineering requirements, Ascogrout 65 provides consistent performance, ensuring complete load transfer and structural stability over time. It is suitable for both interior and exterior applications and can be easily applied using pourable or pumpable methods.

Ascogrout ^®(40/50/80) is specially engineered, cement-based, non-ferrous, non-shrink gun-grade grout. This economical and high-performance cementitious grout offers the advantage of low water requirement and medium to high compressive strength.

Single part, non shrink, cementitious, crack sealer for plaster, masonry and concrete Uses Renderoc CS is used for sealing cracks on plaster, masonry and concrete substrates. Advantages  Single component - Easy to use  Versatile - Can be used for plaster, masonry or concrete,can be painted after application  Non sagging - Can be used for horizontal, vertical and overhead applications  Good adhesion - Eff ective bonding with substrate  Non Shrink - Shrinkage cracking eliminated Description Renderoc CS is a crack sealing cementitious material in powder form. It is easy to apply and can be fi nished or smoothened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings. Properties Colour White Setting time 15 to 20 min Compressive strength 22 N/mm2 in 7 days and (ASTMC109) 24 N/mm2 in 28 days Fresh wet density 1.85 - 1.90g/cc W/p Ratio 0.36 Mix proportions by volume 1 part water : 2.5 -3 parts of powder Minimum application temperature 100C Application instructions Surface Preparation The cracks to be sealed shall be saw cut or chiselled to form a ‘V’ groove of approximately of 6mm x 6mm. The grooves shall be cleaned to remove all the loose particles, dust, etc. The groove shall be sprinkled with clean water before applying the sealing mortar.

Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce concrete. Fast setting micro concrete variants (RGS & SPL) for time-bound projects.
✅ High early strength gain
✅ Best for urgent jacketing jobs
�� Stock available in Mumbai & Navi Mumbai

MYMIX - IG 2 is premixed cementitious, free-flow, non-shrink, high strength, industrial precision grout which is essential to withstand static and dynamic loads. It is a unique product designed to give positive expansion in the plastic and hardened states, producing a low porosity, high durable material. It is carefully designed with fine blended Portland cement, graded sand and other additives for controlled expansion in the plastic state with low water mixing requirement to minimize segregation and deliver high early strength & long-lasting durability

MCON NSG 40 is a non-shrink, high-strength, free-flowing cementitious grout designed for use in construction applications such as grouting of machine foundations, tie rod holes, and concrete repairs. It is formulated with Portland cement, graded fillers, and chemical additives that impart controlled expansion in both the plastic and hardened states, ensuring minimal water demand and high early strength.

Ascogrout 50 GG and 65 GG are cementitious precision grouts manufactured by Ascolite. They are non-shrink, meaning they do not shrink significantly during drying or hardening, and are suitable for various construction applications. .