Venus Enterprises

Conplast SP430SRV is used where a high degree of workability is required and also as an aid to workability retention where delays in transportation or placing are likely or when high ambient temperatures cause rapid slump loss. To facilitate production of high quality concrete of improved durability and water tightness. Advantages   Speeds Construction : Increased workability reduces placing time, equipment and labour element.   Self Compacting : Conplast SP430SRV modified concrete is highly fluid and needs little or no compaction.   Reduced Permeability: Better dispersion, reduces porosity and improves water penetration resistance.   Reduced Segregation: Increased cohesion minimises segregation and bleeding, improving surface finish.   Longer Placing Time: Conplast SP430SRV gives greater usable life of concrete at high ambient temperatures because of its unique workability retention potential.   Improved Pumpability: Increased workability and cohesion aids pumping by reducing line friction, dry packing and slump loss due to temperature.   Chloride Free: Safe in prestressed, reinforced or marine concrete and compatible with sulphate resisting cement or marine aggregate. Standards Compliance Conplast SP430SRV complies with the requirement of ASTM C 494-80 as a Type G Retarding, HighRange Water Reducing Admixture. Description Conplast SP430SRV is a dark brown liquid based on a blend of specially selected organic polymers. The plasticising action of Conplast SP430 SRV enables the production of high workability concrete, which maintains the workability for prolonged periods even at high ambient temperatures. Technical Support The company provides a technical advisory service supported by a team of specialists in the field. Properties Specific Gravity: 1.260 at 270 C Chloride content: Nil to IS:456 Setting Time: Conplast SP430SRV when used at the recommended dosage level may retard the setting of concrete. Air entrainment: Less than 1.5% Compatibility: Conplast SP430SRV is generally compatible with other Fosroc Admixtures but it is recommended that all admixtures be added to concrete separately. Conplast SP430SRV can be used with all types of Portland cements. For advise on special cements consult local Fosroc office. Compressive Strength: Conplast SP430SRV is primarily a highly efficient superplasticiser giving large increase in workability without significant changes in compressive strength. Conplast SP430SRV may be used to produce substantial water reduction resulting in a considerable increase in compressive strength. Mix Design: As with all admixtures that produce flowing concrete, the design technique should be based on high cohesion pump mix technology. Specialist advise from Fosroc is available on request. Application instructions Dosage: It is recommended that the optimum dosage is determined by site trials with the actual concrete mix. As a guide the rate of addition is generally in the range 0.35 to 0.90 litres/100 kg cement for normal mixes & 0.5 to 1 litre/100 kg for high cement content mixes. The higher dosage is used where "flowing concrete" is required and may be found necessary to modify concrete mix proportions. Fosroc can advise on mix design if required. Curing: Normal curing methods such as water spray, wet hessian or a Concure curing membrane should be used. Cleaning: Spillages of Conplast SP430SRV can be removed with water twie Conplast SP430 DIS

FLEX O PATCH is supplied in kit form as 100% solid, self leveling, three component, modified elastomeric compound developed in use with specially blend aggregates to repair potholes, bridge decks, driveways, parking decks PQC repair, etc. FLEX O PATCH has the unique ability to absorb energy from impact loads and disperse this energy throughout the header material; reducing cracking and spalling. It has an excellent adhesion to concrete. It provides excellent resistance to moisture and abrasion along with very good resistance to solvent, chemicals, and oxidation. 

Silico Con is a dry mix concrete which is uniform and gives consistent quality. Tamped, compacted and filled easily and this helps in saving the time. It can be used for both exterior and interior applications.

MYMIX Ritebuild STA is a cementitious, thin-set, high polymer-modified, single-component, heavy-duty adhesive designed for fixing natural stones, marble, granite, and vitrified tiles in interior and exterior floor and wall applications, including building facades.