Venus Enterprises

“MAGNICRETE MAGNIGROUT” is General Purpose High Strength Cement based grouting material designed to transfer load effectively, ensuring grouting precision and durability of structure. “MAGNIGROUT” inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength. HIGH STRENGTH, NON-SHRINK CEMENTITIOUS GROUT “MAGNIGROUT” has been carefully developed to optimum performance, even in the toughest applications along with unparalleled ease of application. It provides long life expectancy and maintains the rigid equipment to foundation connections which is necessary to meet demanding installation requirements. “MAGNIGROUT” complies and exceeds the guidelines provided in ASTM C 1107/ C1107M and EN 1504-3 Class R4  

UltraTech Mykrofill is an injecting grout for pressure grouting and injection applications in concrete and similar structures.

Fiberglass mesh is fiberglass leno fabric as the substrate, the anti-emulsion polymer coating after immersion, which has good alkali resistance, flexibility and strong tensile strength, it can be widely used in exterior insulation finishing system (EIFS), roofing system, marble, etc.

Fiberglass mesh is fiberglass leno fabric as the substrate, the anti-emulsion polymer coating after immersion, which has good alkali resistance, flexibility and strong tensile strength, it can be widely used in exterior insulation finishing system (EIFS), roofing system, marble, etc.

Very high compressive and flexural strength at very short time. • Longer pot life ensuring negligible wastage. • Non-shrink grout with controlled positive expansion ensures proper load transfer and durability of structure. • High fluid consistency and bleed resistance. • Quickly and easily placed by pouring or pumping. • Resists chemical attack, oils, petroleum products, solvents, and mild caustic alkalis. • No added chloride or gypsum. • Excellent for dynamic and static loading conditions. • Free of chlorides and additives, that may lead to corrosion. • High drill resistance property. • Self-compacting. • Product variants available in both Flow-able and Normal Trowel-able consistency

MAGNICRETE - MAGNIGROUT is General Purpose High Strength Cement based grouting material designed to transfer load effectively, ensuring grouting precision and durability of structure. MAGNIGROUT inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength.

MAGNIGROUT has been carefully developed to optimum performance, even in the toughest applications along with unparalleled ease of application. It provides long life expectancy and maintains the rigid equipment to foundation connections which is necessary to meet demanding installation requirements.

MAGNIGROUT complies and exceeds the guidelines provided in ASTM C 1107/ C1107M and EN 1504-3 Class R4.

It is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fi llers are designed to assist uniform mixing and produce a consistent grout.

• High early strength
• Superior compressive strength
• Quick setting, shrinkage free
• Easy to use
• High durability
• Saves time and manpower
• Available in normal & flowable variant 

UltraTech Seal and Dry Hiflex is a two component, cement based, acrylic emulsion polymer based elastomeric, water proof coating incorporated with high quality polymer additives, and fillers for all positive side water proofing applications of Terrace, Slope Roofs, Balcony, Domes, Swimming Pools, Sump Tanks, exterior walls. Highly suitable for demanding applications with area greater than 10,000sq.ft. Elongation is more than 100% at a tensile force of 50Kg/Sq.cm.

High performance superplasticising admixture Uses  To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix.  Particularly suitable for precast concrete and other high early strength requirements.  To significantly improve the workability of site mixed and precast concrete without increasing water demand.  To provide improved durability by increasing ultimate strengths and reducing concrete permeability.  In screeds it reduces the water content required to give suitable workability for placing and compaction. 

To produce pumpable concrete   To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.   To produce high workability concrete requiring little or no vibration during placing. Advantages   Improved workability - Easier , quicker placing and compaction.   Increased strength - Provides high early s tr e n g th fo r precast concrete if water reduction is taken advantage of.   Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.   Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete   Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates. Standards Conplast SP440 complies with IS:9103:1999 and BS:5075 Part 3 .Conplast SP440 conforms to ASTM-C-494 Type ‘D’ and Type ‘G’ depending on the dosages used. Description Conplast SP440 is a blend of organic polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP440 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability. Properties Specifi c Gravity : 1.17 to 1.19* pH at 270C : Minimum 6* Chloride content : Nil as per IS:456 and BS:5075* Air entrainment : Approx. 1% additional air is entrained * The uniformity parameters like specifi c gravity, pH, chloride content etc. will vary for specifi c customer requirements and mix design. Please refer our MTC issued for specifi c product confi guration for measuring our product parameters that will be constantly and consistently administered. Conplast SP440 Compatibility : Can be used with all types of cements except high alumina cement. Conplast SP440 is compatible with other types of Fosroc admixtures when added separately to the mix. Site trials should be carried out to optimise dosages. Workability : Can be used to produce fl owing concrete that requires no compaction. Some minor adjustments may be required to produce high workable mix without segregation. Cohesion : Cohesion is improved due to dispersion of cement particles thus minimising segregation and improving surface fi nish. Compressive strength : Early strength is increased upto 40% if water reduction is taken advantage of. Generally, there is improvement in strength upto 20% depending upon W/C ratio and other mix parameters. Durability : Reduction in W/C ratio enables increase in density and impermeability thus enhancing durability of concrete. Application instructions Dosage Trials need to be carried out at site to optimise the dosage of the admixture for the particular mix design and materials. However as a guide the rate of addition is generally in the range of 0.5% to 1.2% by weight of cement for normal grades of concrete. A dosage of upto 1.5% may be used depending on the mix design and to achieve specifi c slump requirements. Use at other dosages Dosages outside the typical ranges quoted above can be used to meet particular requirements. Contact Fosroc for advice. Over dosage An overdose of above the recommended level of admixture may result in high workability, slight increase in air entrainment and retardation of settingtime. The ultimate strength of the concrete will not be adversely affected and will generally be higher than for normal concrete if properly placed and cured. Dispensing The measured quantity of Conplast SP440 should be added along with the gauging water. For best results, add Conplast SP440 in the last phase after prewetting the mix with 80% of the total water required.

Auramix 350 DIS is a high performance super plasticizer suitable for low and high grade concrete and intended for applications where high water reduction and long workability retentions are required. Auramix 350 DIS developed to use in:     Long workability retention concrete. Pumpable Concrete.     High performance concrete Advantages   Low viscosity admixture suitable for pumping diff erent grades of concrete to greater heights.   Suitable for concrete having cement replacements and low water cement ratio.   Provides higher strength without increase in cement content or reduction in workability. Ideal for precast concrete production.   Reduce rate of workability loss normally associated with super plasticiser. Reduces shrinkage cracking because of lower water cement ratio. Makes the concrete water impermeable.   Better resistance to Carbonation.   Reduce Shrinkage and Creep.   Increase Durability. Standard Compliance Auramix 350 DIS complies to IS:9103:1999 as water reducing and retarding type admixture and ASTM C 494 Type F and G depending on dosage. Description Auramix 350 DIS is a unique combination of new generation super plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water. Auramix 350 DIS disperses the cement particles eff ectively in the concrete mix and hence exposes a larger surface area to the hydration process. This eff ect is used either to increase Auramix 350 DIS the strength or to produce high workability concrete or reduce cement content of concrete or to retard the setting time of concrete. Technical support Fosroc provides technical advisory service for on-site assistance and guidance on mix design, optimum dosage evaluation of trials. Properties Appearance : Light Brown Liquid pH : Minimum 6.0 Volumetric mass @ 250 C : 1.08 ± 0.02 kg / litre Chloride content : Nil to IS:456 Workability Retention : 2 hours and more Depending on Dosage * The uniformity parameters like specifi c gravity, pH, chloride content etc. will vary for specifi c customer requirements and mix design. Please refer our MTC issued for specifi c product confi guration for measuring our product parameters that will be constantly and consistently administered Dosage The optimum dosage of Auramix 350 DIS to meet specifi c requirement should always be determined by conducting laboratory and batch trials. However the normal dosage ranges between 0.3 to 1.3 precent by weight of total cement or binder content. Dosage beyond Limits: Dosage beyond limits can be used to meet particular mix requirements in consultation with Fosroc technical department. Effect of over dosage: Over dosage may cause delay in setting and segregation. Estimating Packaging: Auramix 350 DIS is available in 200 kg, 250kg and bulk Storage Auramix 350 DIS has a minimum shelf life of 12 months provided the temperature is kept within range of 20C and 50C.

Smartcare General purpose Grout is a free flowing, high strengh non shrink cementitious grout. It is blend of a portland cement, graded fillers and other additives which imparts controlled expansion in the plastic / hardened state in addition to minimizing water demand.

“Magnicrete Magnigrout” is General Purpose High Strength Cement based grouting material designed to transfer load effectively, ensuring grouting precision and durability of structure. “MAGNIGROUT” inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength. HIGH STRENGTH, NON-SHRINK CEMENTITIOUS GROUT “MAGNIGROUT” has been carefully developed to optimum performance, even in the toughest applications along with unparalleled ease of application. It provides long life expectancy and maintains the rigid equipment to foundation connections which is necessary to meet demanding installation requirements. “MAGNIGROUT” complies and exceeds the guidelines provided in ASTM C 1107/ C1107M  

Uses ! To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix. ! Particularly suitable for precast concrete and other high early strength requirements. ! To significantly improve the workability of site mixed and precast concrete without increasing water demand. ! To provide improved durability by increasing ultimate strengths and reducing concrete permeability. Advantages ! Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times. ! Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents. ! Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content. ! Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures. ! Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability. ! Chloride free, safe for use in prestressed and reinforced concrete. Standards compliance Conplast SP430 conforms with BS 5075, BS:EN 934-2 and with ASTM C494 as Type A and Type F, depending on dosage used. Description Conplast SP430 is a chloride free, superplasticising admixture based on selected sulphonated napthalene polymers. It is supplied as a brown solution which instantly disperses in water. Conplast SP430 disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively. The very high levels of water reduction possible allow major increases in strength to be obtained

Magnicrete Magnigrout” is General Purpose High Strength Cement based grouting material designed to transfer load effectively, ensuring grouting precision and durability of structure. “MAGNIGROUT” inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength. HIGH STRENGTH, NON-SHRINK CEMENTITIOUS GROUT “MAGNIGROUT” has been carefully developed to optimum performance, even in the toughest applications along with unparalleled ease of application. It provides long life expectancy and maintains the rigid equipment to foundation connections which is necessary to meet demanding installation requirements. “MAGNIGROUT” complies and exceeds the guidelines provided in ASTM C 1107/ C1107M and EN 1504-3 Class R4 

 Very high compressive and flexural strength at very short time. • Longer pot life ensuring negligible wastage. • Non-shrink grout with controlled positive expansion ensures proper load transfer and durability of structure. • High fluid consistency and bleed resistance. • Quickly and easily placed by pouring or pumping. • Resists chemical attack, oils, petroleum products, solvents, and mild caustic alkalis. • No added chloride or gypsum. • Excellent for dynamic and static loading conditions. • Free of chlorides and additives, that may lead to corrosion. • High drill resistance property. • Self-compacting. • Product variants available in both Flow-able and Normal Trowel-able consistency. “M

Mcon Magic COat WP, Mcon Magic Coat 2K, Mcon Magic Coat 2K White, Mcon Magic Coat Flexi, Mcon Magic Coat PU White, Mcon Magic Coat PU Grey, Mcon Magic Coat PU Antiroot, Mcon Magic Coat Primer, Mcon Magic Screed, Mcon Magic Salt Guard, Mcon Magic Coat DP, Mcon Magic Grout PU, Mcon Magic Coat Clear, Mcon Magic Coat Instant, Mcon Magic Coat Black, Mcon Magic Coat S, Mcon Magic Coat Net, Mcon Magic Geotex, Mcon Magic Seal PU, Mcon Magic Seal P, Mcon Magic Seal G

Auramix 400 is a high performance superplasticiser intended for applications where high water reduction and long workability retention are required, and it has been developed for use in:   Self-compacting concrete,   Pumped concrete,   Concrete requiring long workability retention,   High performance concrete. Standard Compliance Auramix 400 complies with IS:9103-1999(2007). It also complies with ASTM C494 Type G depending on the dosage used. Advantages   Low viscosity suitable for pumping of different grades of concrete to higher fl oors   Higher E modulus   Improved adhesion to reinforcing and prestressing steel   Better resistance to carbonation   Lower permeability   Better resistance to aggressive atmospheric conditions   Reduced shrinkage and creep   Increased durability Description Auramix 400 is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in fl owable concrete. Auramix 400 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability. Auramix 400 Technical support Fosroc provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment. Properties Appearance : Light yellow coloured liquid pH : Minimum 6.0 * Volumetric mass @ 200 C : 1.09 kg/litre Chloride content : Nil to IS:456 * Alkali content : Typically less than 1.5 g Na2O equivalent / litre of admixture. * The uniformity parameters like specifi c gravity, pH, chloride content etc. will vary for specifi c customer requirements and mix design. Please refer our MTC issued for specifi c product confi guration for measuring our product parameters that will be constantly and consistently administered. Dosage The optimum dosage of Auramix 400 to meet specifi c requirements should always be determined by trials using the materials and conditions that will be experienced in use. The normal dosage range is between 0.5 to 3.0 ltrs/100 kg of cementitious material. Use at other dosages Dosage outside the normal range quoted above can be used to meet particular mix requirements. Contact Fosroc for advice in these cases Effects of overdosing Overdosage may cause delay in the setting time and segregation. Estimating Packaging Auramix 400 is available in 200kg and 250kg drums and bulk tanker.

UltraTech Microkrete Cement is a polymer enriched cement based high performance, high strength, non-shrink high quality micro concrete for micro concreting and jacketing applications of columns, beams, and concrete slab repairs. Ideal for fast and durable repairs. There are three variant Microkrete

Auramix 300 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are required, and it has been developed for use in:   Mass raft foundation,   Pumped concrete,   Concrete requiring long workability retention,   High performance concrete. Advantages   Increased retardation controls the heat of hydration and yields high ultimate strength   Higher E modulus   Improved adhesion to reinforcing and prestressing steel   Better resistance to carbonation   Lower permeability   Better resistance to aggressive atmospheric conditions   Reduced shrinkage and creep   Increased durability Standard Compliance Auramix 300 Complies with IS 9103-1999(2007) . It also complies with ASTM C 494 Type F & Type G depending on the dosage used. Description Auramix 300 is a unique combination of the latest generation superplasticisers , based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in fl owable concrete. Auramix 300 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability. Auramix 300 is a strong superplasticiser allowing production of consistent concrete properties around the required dosage. Auramix 300 Technical support Fosroc provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment. Properties Appearance : Light yellow coloured liquid pH : Minimum 6.0 * Volumetric mass @ 200 C : 1.085 kg/litre Chloride content : Nil to IS:456 * Alkali content : Typically less than 1.5 g Na2O equivalent / litre of admixture. * The uniformity parameters like specifi c gravity, pH, chloride content etc. will vary for specifi c customer requirements and mix design. Please refer our MTC issued for specifi c product confi guration for measuring our product parameters that will be constantly and consistently administered. Dosage The optimum dosage of Auramix 300 to meet specifi c requirements should always be determined by trials using the materials and conditions that will be experienced in use. The normal dosage range is between 0.5 to 3.0 ltrs/100 kg of cementitious material. Use at other dosages Dosage outside the normal range quoted above can be used to meet particular mix requirements. Contact Fosroc for advice in these cases Effects of overdosing Overdosage may cause delay in the setting time and segregation. Estimating Packaging Auramix 300 is available in 200 kg and 250 kg drums and bulk tanker

Organic Bipolar concrete penetrating corrosion inhibiting admixture. Uses: Auramix BCI is used as corrosion inhibiting admixture for all reinforced concrete and not limited to Below ground structure such as Pile, pile cap, mat foundation where chloride threshold value is more in the soil.  Bridges and fl yovers Structures in coastal areas and submerged conditions Power plants Steel plants High rise buildings Structures in sea water Pre-cast Elements Tunnels and underground structures Standards compliance Auramix BCI complies to various standards such as ASTM G1, JIS 1535(modifi ed), IS 9103 for compressive strength, AASHTO - T259, ASTM G3 for steel bars embedded in concrete, ASTM G109*, ASTM G180 and ASTM C1582M. Advantages Auramx BCI is a low dosage admixture having  Nitrites free  Improves durability of the structure  Used as a admixture: Dosage is independent of anticipated chloride levels Ensures steel protection even in the hardened concrete Does not get consumed by cement hydration  No adverse eff ect on slump retention and compressive strength Independent reports tested to International standards

To produce pumpable concrete   To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.   To produce high workability concrete requiring little or no vibration during placing. Advantages   Improved workability - Easier, quicker placing and compaction.   Increased strength - Provides high early strength for precast concrete if water reduction is taken advantage of.   Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.   Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete   Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates. Standards Conplast SP500 complies with IS:9103:1999 and BS:5075 Part 3 and with ASTM C494 Type ‘F’ and ‘G’ admixture depending on dosage. Also Confi rms to IS 2645-2003 as waterproofi ng admixture. Description Conplast SP500 is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP500 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability. Properties Specifi c gravity 1.250 - 1.270 at 270C* pH at 270C Minimum 6* Chloride content Nil toIS:456* * The uniformity parameters like specifi c gravity, pH, chloride content etc. will vary for specifi c customer requirements and mix design. Please refer our MTC issued for specifi c product confi guration for measuring our product parameters that will be constantly and consistently administered. Conplast SP500 Compatibility : Can be used with all types of cements except high alumina cement. Conplast SP500 is compatible with other types of Fosroc admixtures when added separately to the mix. Site trials should be carried out to optimise dosages. Workability : Can be used to produce fl owing concrete that requires no compaction. Some minor adjustments may be required to produce high workable mix without segregation. Cohesion : Cohesion is improved due to dispersion of cement particles thus minimising segregation and improving surface fi nish. Compressive strength : Early strength is increased upto 40% if water reduction is taken advantage of. Generally, there is improvement in strength upto 20% depending upon W/C ratio and other mix parameters. Durability : Reduction in W/C ratio enables increase in density and impermeability thus enhancing durability of concrete. Application instructions Dosage Trials need to be carried out at site to determine the exact dosage of the admixture for the particular mix design and materials. However for normal grades of concrete a dosage from 0.5% - 1.0% by weight of cementitious material is recommended, the dosage may be increased to 1.5% to achieve specifi c slump requirements. For microsilica concrete where a high amount of water reduction and slump retention are required, trials need to be carried out to arrive at the correct dosage, as the dosage may increase upto 2.0% or even upto 2.5% by weight of cementitious material depending on mix design and performance required. Use at other dosages Dosages outside the typical ranges quoted above can be used to meet particular requirements. Contact Fosroc for advice. Overdosage An overdose of above the recommended level of admixture may result in high workability, slight increase in air entrainment and retardation of setting time. The ultimate strength of the concrete will not be adversely aff ected and will generally be higher than for normal concrete if properly placed and cured. Dispensing The measured quantity of Conplast SP500 should be added along with the gauging water. For best results, add Conplast SP500 in the last phase after prewetting the mix with 80% of the total water required.