Venus Enterprises

Durowhite can be applied to any interior and exterior surfaces and is suitable for lightweight concrete blocks and sand cement plastered surfaces. Its non-sag ...

High Build, Chemical Resistant, Bituminous Waterproof CoatingT-GUARD® BC coating is based on raw materials which are amongst the most water and water-vapour resistant surface coating materials available. They are also resistant to a wide range of chemical attack.Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose.T-GUARD® BC incorporates fibres which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.Uses Horizontal and vertical damp-proof membranes in sandwich construction for floors, walls and roofs. Internal lining of water storage tanks including for potable water. External treatment of below ground structures against water ingress and attack by aggressive ground water.

“Venus Enterprises”, are Sole Proprietorship (Individual), based company, engaged in Wholesale trading of Waterproof Paint, Construction Materials, Waterproofing Liquid and many more. Under the direction of “Shejal”, we have achieved the highest place in the industry. We also provide Coating Service, Crack Sealing Service, Waterproofing Service, Cement Grouting Service, Bitumen Membrane Service and much more.

Concrete AC Sheets Gypsum Boards MCON WALL PUTTY Sand Cement Plaster Features :Packing Coverage Gives proper level with smooth finish to increase coverage of paint

Exposed Concrete AC Sheets Features :MCON SUPER COAT PASTE ACRYLIC POLYMER BASED WALL PUTTY PASTE Ceilings & Gypsum Plastered Surfaces Old Painted Areas Provides smooth, silky and featheredged finish to substrate to facilitate better texture of paint Due to good bonding property it is more durable Ensures use on all common types of building interiors

MCON Super Coat Powder is an acrylic-based, water-resistant wall putty in powder form that requires precise water addition to form the putty. It's used to seal pinholes and blowholes on concrete/plastered surfaces and create a smooth, even surface for painting. It is suitable for both interior and exterior applications and enhances paint adhesion and durability. 

Asian Paints Professional Wall Putty is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish.
PRODUCT BENEFITS
Asian Paints Professional Wall Putty has the following roduct benefits:
A.      Provides smooth and uniform finish to rough plasters
B.      Good Workability Does not require curing with water
C.       Good water resistance
D.      Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength
E.      Controlled water vapour permeability
F.       Excellent abrasion resistance
G.      Resists growth of algae and fungi on wall
H.      Good intercoat adhesion to emulsion paints
Give your walls a great foundation with Trucare Wall Putty - a white cement based putty that is packed with functional additives. It helps give interior and exterior rough plasters an even finish along with proving to be a great undercoat adhesion to emulsion paints.

MCON MAARVEL – WALL CARE PRIMER is water based primer best suitable for internal and external walls to be painted. It offers best in class adhesion to next coat/ paint & offers maximum coverage as well.
Wall Care Primer 2 in 1 Wall Primer Packing :- 1,4,10 & 20 Ltr Plastered Surface Dry Walls Exterior Plastered MCON MAARVEL – WALL CARE PRIMER is water based primer best suitable for internal and external walls to be painted. It offers best in class adhesion to next coat/ paint & offers maximum coverage as well. Weather Protected “ “ Good Adhesion Waterproofing Propertie

MCON Crack Filler Paste is a ready-to-use, acrylic polymer-based white crack filler formulated with selected graded fillers, lightfast pigments, and additives. It offers excellent adhesion and flexibility, accommodating plaster cracks and providing a water-resistant surface with an aesthetic finish. Suitable for both internal and external applications, it effectively seals cracks up to 5 mm in width.​

Areas of Application:

• Internal and external plastered brick masonry wall cracks (up to 5 mm width)

• Hairline cracks in painted surfaces causing internal water leakage

• Cracks in plasters, IPS, cement sand screeds, and non-structural cracks​

Dr. Fixit Bathseal Select is a ready-to-use; liquid-applied elastomeric water based waterproof coating. That curesto form a monolithic membrane designed for wet areas under tiled finish application. Being a 1K liquid appliedcoating, it reduces mixing errors and saves time due to excellent flow properties and thereby easy application withroller or brush. It is fully compatible with polymer modified cement based tiles adhesives, screeds and renders.Technical compliances:} Complies with technical requirements of Singapore Housing Development Board (HDB) for toilets, bathroomsand other wet area applications} Compliance to Australian Standard AS /NZS 4858 :2004 class II membrane “Waterproofing of Wet Areas inResidential Buildings”Typical ApplicationWaterproof coating for internal wet areas as under tiled finishesConcrete, Pre-fabricated bathrooms, toilets and drywall partitions, kitchens, laundry area.Features} Ready to use straight from the pail} Flexible, has crack bridging ability} High bond strength to a variety of substrates and building materials} Bonds to clean metal drains, PVC, and ABS drain assemblies} Liquid applied membrane, can be applied with roller, brush} Non-toxic, Provides a seamless coatingMethod of Application1 GENERAL SURFACE PREPARATION} Surface must be clean, dry and in sound condition to ensure adequate adhesion.} To aid in adhesion on a concrete or screeded surface, the smoothness of substrate should be at least theequivalent to that of a wood float or light broom finish} Remove all oil, grease, dust, loose particles and other foreign material.} Fill all cracks, voids and bug-holes with an appropriate Crack Filler.} Any surface defects should be repaired prior to application of membrane.} Metal and PVC fitting and trims must be primed with Dr. Fixit Bathseal Select to provide good bond.} Grind the, smooth finishing of wall and slab and make it rough to receive the coating} All junction of drywall subject to movement shall be first sealed with Dr. Fixit PU Sealant} All new concrete slabs must have a wood float finish and be allowed to cure for at least 6 weeks.} Required to provide fillet at all vertical and horizontal transition of size to 50 mm x 50 mm with cement andsand mortar screed admixed with Dr. Fixit Pidicrete URP 10 % by weight of cement} Cracks due to shrinkage should be repaired with polymer modified mortar.