Venus Enterprises

UltraTech TileFixo CG is a single-component, white cement‑based, pigmented grout, enhanced with polymer additives and fine fillers. It is engineered to fill joints between tiles, marble, granite, and natural stone—ideal for joint widths up to 6 × 6 mm. It works effortlessly on both floor and wall applications

Sika® Tile Adhesive® is a single component, pre-packed tiling adhesive mortar combining cement with selected grades of silica sand and several admixtures. Sika® Tile Adhesive® has good bonding and consistency in different climate, and can be used for adhering different kind of tiles. Only requires addition of water. USES Sika® Tile Adhesive® provides the following properties:
Factory mixed – Consistent quality
Better workability. Save 25-50% of time
Better coverage: 8-9 m2 per 20 Kg (based on 2 mm mortar thickness)
Tiles can be adjusted up to 30minutes after application
Fixing wide range of tiles
Good bond adhesion In the following substrates:
Concrete
Hard natural and reconstituted stone
Solid rock
Hollow and solid masonry
Cementitious plaster and render CHARACTERISTICS / ADVANTAGES
Extended Open Time up to 30min at 20°C
Pot life up to 2h30min at 20°C
Initial setting time is up to 360min
Final setting time starting 420min
Excellent adhesion to the substrate
Economical by 10-20% than conventional mortar
Low wastage 

HOME. SHIELD. High performance. TILE ADHESIVE PLUS cement based tile adhesive. DAMPCHECK. Formula. Features. Usability. Bonding. Cohesiveness. Strength.