Venus Enterprises

Its a food grade epoxy base materials. Can be use in water tanks for drinking purposes also. It can also be use in swimming pools as a under coating systems.

“Venus Enterprises”, are Sole Proprietorship (Individual), based company, engaged in Wholesale trading of Waterproof Paint, Construction Materials, Waterproofing Liquid and many more. Under the direction of “Shejal”, we have achieved the highest place in the industry. We also provide Coating Service, Crack Sealing Service, Waterproofing Service, Cement Grouting Service, Bitumen Membrane Service and much more.

Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Berger Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes. Advantages  Anti corrosive - Active 'Zinc-rich' system combats corrosion by electro chemical means.  Two component product - Easy to mix and use.  Timesaving - Touch dry after 30 to 45 mins.  Excellent adhesion - Exhibits excellent bond strength in cementitious repairs.

Mcon Magic Coat Flexi is a single component, modified poly-acrylic, liquid applied coating that iscomposed of specially developed polymers, properly selected and graded fillers. It cures byreaction with atmospheric moisture to give a tough elastomeric waterproof membrane.Features & Benefits :-Elastomeric – On that accommodate cracks up to 2 mm with an elasticity of 100-150%.Low water permeability – excellent resistance to ingress of water.Adhesion – excellent adhesion to concrete and masonry surfaces.No curing required.MCON MAGIC COAT FLEXIAreas of Application :-Appearance Technical Details :-SolventSolidsDensityViscosityOdorColorThixotropic liquidWater50 - 60 %1.45 - 1.52 g/cm³1.6 - 3.5 poise at 25°C Styrene acrylic WhiteTerrace GardenPodiumsFoundationsBasements

It is coat tar base epoxy materials. Normally use for under sub soil area over concretet surfaces. It is use as an anti corrosive coatings for concrete surfaces.

Nitozinc Primer Std is the recommended anti-corrosive primer for exposed steel reinforcement and structural steel on site.The product actively resists corrosion and avoids the generation of incipient anodes in immediately adjacent locations. Advantages  Active ‘Zinc-rich’ system combats corrosion by electro chemical means. Formulated for use with Nitocote protective coatings and enamel paints Two component product - easy to mix and use. Description Nitozinc Primer Std is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid. 

The table below summarises which Nitoprime product should be used in diff erent situations. Where multiple choices exist, fi nal choice will then depend upon the cure times required and site conditions such as ventilation. Where H.C.A preparation techniques are used, only Nitoprime 30 or 31 is suitable as primer. Type of concrete Fosroc Products Dense Normal Porous Nitofl or FC150/FC500 30/31 30/31/32 30/31 Nitofl or SL Range 30/31 30/31/32 30/31 Nitofl or TF5000/10000 30/31 30/31 30/31 Nitofl or Antistatic 30/31 30/31/32 30/31 Cicol ET Slurry 30/31 30/31 30/31 Nitocote EP Range 30/31 30/31 30/31 Nitocote ET Range 30/31 30/31 30/31 Nitomortar HB/S 30/31 30/31 30/31 Description Nitoprime 31 is used for fl ooring work with the Nitofl or resin fl ooring range, it is also recommended for some coating systems. Nitoprime 31 is a two-part solvent free, general purpose aromatic amine cured epoxy based primer. Particularly suitable for normal weather conditions allowing suffi cient time to fi nish the fl ooring/coating application. 

An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces. Areas of Application Concrete structures like sunken portion, toilets, balcony, basement, chajjahs, terrace, concrete repairs and water retaining structures. Features & Benefits } A tough, hard wearing, breathable waterproofing system for residential, industrial, housing and commercial buildings. } Can be applied in uniform thickness to horizontal and vertical surfaces. } Excellent bond to most building materials. } Reduces or prevents salt penetration into concrete. } High ultra voilet resistance. } Highly durable. } Economical system. } Is non-flammable and does not give off toxic gases, when exposed to fire. Method of Application 1. For waterproofing Surface preparation } Prior to application of Dr. Fixit Powercrete, ensure to clean the substrate which should be free from all the dust, foreign particles, loose aggregate and oil grease etc. This can be done with the help of scarifying, grinding, water jetting and sand blasting etc. } The surface should be wetted, well prior to application, thoroughly with water to get SSD condition. } All the depression or pin holes /pot holes to be repaired using Dr. Fixit Powercrete modified mortar in mixing ratio of ( 1 kg cement : 1.50 kg silica sand : 0.50 kg of Dr. Fixit Powercrete ) Coating application } Mix Cement with Dr. Fixit Powercrete in ratio of 1 : 0.50 ( 1 kg cement OPC53 : 0.50 Dr. Fixit Powercrete ) by weight. } The mix should be stirred thoroughly until smooth homogeneous paste is obtained. } Apply first coat over SSD/wet condition substrate. } Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas. } Using a nylon brush, apply one coat of Dr. Fixit Powercrete coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of Dr. Fixit Powercrete slurry coating over the surface. } Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage. Curing } Allow Dr. Fixit Powercrete coating to air cure for 3-6 hours after the final coat. } Do not allow the rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition. } However, a moist curing after the air drying is advisable. } Following the moist curing, Dr. Fixit Powercrete coating shall be allowed to air cured for 3 days before submerging it in water.