Venus Enterprises

Can be applied by brush or spatulas.• Elastic and flexible membrane with high mechanical resistance• Excellent adhesion to old and new surfacesZentrifix® ElasticHigh Performance Acrylic Polymer Flexible Waterproofing membrane and Protection SystemAreas of Application• Sealing of strained basement walls• Waterproofingsystem for high water heads• Sealing and protection of bridge decks, splash zones, tunnels, cooling towers, balconies, sunken areas, retaining walls, etc• Waterproofing systems for any over or underwater applications (with suitable protective layer)• As a carbonation resistant coating in repair and protection systems• Excellent coating for areas showing changes in Geometry.Application Notes GeneralZentrifix ®Elastic is a 2 component mineral based polymer modified waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressure is high.It is fully suitable for normal waterproofing requirement of terraces, Parking structures ,basements ,swimming pools ,sanitary areas etcAdvantagesZentrifix ®Elastic when hardened produces a seamless elastic film, Which is having a excellent water resistance. The component B of Zentrifix ®Elastic is a cement bound mineral modified mortar of proper grading While component A is an acrylic polymer modified emulsion. The crack bridging ability is about 0.7mm in normal application thickness. Additional coats increase the crack bridging characteristic.Instructions For Use Surface PreparationThe surface to be coated must comply with the principles of building construction and should fulfill the structural requirements, including properly designed slopes to avoid stagnation of water in case of roofs. Any cracks, potholes, expansion joints etc. Should be firm, clean free from fats, oil, grease, dust or any other contaminations.All loose material, dirt, grease oil dust, mould release agents etc. should be removed from the substrate to be treated. The substrate should have sufficient bonding strength, for example in case of concrete at least 1.5N/mm2 to achieve efficient and durable waterproofing layers. If the surface is very smooth, we advise to roughen by suitable methods for example by using wire brush or similar tools.Mixing InstructionsZentrifix ®Elastic consists of a powder and a liquid component. The liquid component should be emptied into a clean mixing vessel and the powder slowly added to,it.,while mixing with a slow speed mixing paddle(approx..400rpm) until a consistent ,lump free homogenous mass is produced. The mixing ratio is approximately 100 parts by weight of powder to 50 parts by weight of liquid.Zentrifix ®Elastic can be applied by trowel or brush. Before application the surface should be slightly moistened but should not be wet.Zentrifix ®Elastic can be applied in standard thickness of 2-3 mm in 2coats. Maximum thickness of 4mm is allowed and the application should be in three coats. The first coat should be carefully worked into the surface by brush in order to close the pores. Allow 3 to 4 hrs before the next coat. The final coat should be finished with a steel trowel. Do not use wooden or rubber-based finishing tools. Zentrifix ®Elastic should be applied within the temperature range of 10°C to 35°C.Curing and ProtectionZentrifix ®Elastic coatings are self-curing, but should be protected from direct sunlight, moisture, rain, frost etc. It is recommended that any protective decorative systems like tiles, wooden panels, plastic boards etc be fixed only after Zentrifix®Elastic coatings is sufficiently hardened, at least for 7 Days. Care should be taken that the layer of Zentrifix ®Elastic coating is not damaged during subsequent operations. Small damages can be retouched easily before subsequent operation

MASTERCRETE M-81 is a single component 100% acrylic polymer admixture specially developed to improve the properties of cementitious compositions. When it is used with combinations with standard quality of ordinary Portland cement, it enhances the mechanical properties such as bonding (adhesion) with various building materials, flexural, compression and impact strength. It improves the thin section fragility of cement when used as coating. 

A Double Side Self Adhesive Membrane (D-SAM) is a type of waterproofing membrane with a pressure-sensitive adhesive on both sides, allowing for easy and quick application without needing additional materials or heating. These membranes are typically made of materials like modified bitumen, polyester film, or HDPE film and are used for various waterproofing applications. Key Features and Benefits of D-SAM:

• Cold Application:D-SAM can be applied without the need for heating, making installation simple and quick. 
• Self-Adhesive:The pressure-sensitive adhesive allows the membrane to adhere directly to the substrate without the need for additional adhesives or solvents. 
• Versatile Applications:D-SAM can be used in various waterproofing applications, including basements, retaining walls, roofs, and more. 
• Flexibility and Durability:These membranes are designed to be flexible and durable, providing long-lasting waterproofing solutions. 
• Easy Installation:The self-adhesive nature and cold application method make D-SAM easy to install, reducing labor costs and time. 
• Clean Application:D-SAM eliminates the need for additional adhesives or solvents, resulting in a cleaner working environment. 

Types of D-SAM:

• Modified Bitumen: A common type of D-SAM, often reinforced with polyester or fiberglass, and available in single or double-sided adhesive forms. 
• HDPE (High-Density Polyethylene): D-SAMs made with HDPE offer excellent water resistance and durability. 
• EPDM (Ethylene Propylene Diene Monomer): D-SAMs made with EPDM offer flexibility and resistance to weathering and UV damage. 

Application Areas:

• Below Ground Structures:D-SAMs are widely used for waterproofing basements, tunnels, and other below-ground structures. 
• Roofing:They can be used as a waterproofing layer on roofs, including flat roofs, pitched roofs, and inverted roofs. 
• Retaining Walls:D-SAMs can be used to waterproof retaining walls and other vertical structures. 
• Other Applications:They can also be used in various other waterproofing applications, such as balconies, terraces, and decks. 

Storage and Handling:

• D-SAMs should be stored in their original, sealed packaging in a cool, dry place.
• Protection from direct sunlight and extreme temperatures is recommended.
• Avoid stacking pallets of rolls on top of each other or under other materials during transport or storage. 

Self-adhesive aluminum membranes are waterproofing products with a pre-applied adhesive, often made of modified bitumen or SBS, with a protective aluminum foil or film on the surface. They are cold-applied, meaning they don't require heat or special tools, and are designed for a variety of waterproofing applications. Key Features and Benefits:

• Cold-applied: No heat or special tools needed for installation. 
• Flexible and durable: Designed to withstand movement and stress. 
• Water and vapor barrier: Effectively prevents water and moisture from penetrating. 
• Aluminum surfacing: Provides solar reflectance, UV protection, and heat insulation. 
• Easy installation: Quick and simple to apply, saving time and labor. 
• Wide range of applications: Suitable for various waterproofing needs, including roofs, basements, and other structures. 

Technical Data Sheets (TDS) typically include information about:

• Physical Properties: Thickness, tensile strength, tear resistance, elongation, peel adhesion, etc. 
• Chemical Resistance: Resistance to chemicals, pollutants, and temperature fluctuations. 
• Application Instructions: Surface preparation, primer requirements, and application methods. 
• Storage and Handling: Recommendations for storage, transportation, and safe handling of the product. 
• Testing Standards: Reference to relevant testing methods used to determine performance. 

Example TDS Features:

• BM Self AL (Bitumag):Emphasizes solar reflectance, puncture resistance, and temperature resistance. 
• Mak Polyplast SAM-AL:Highlights UV reflection, heat insulation, and suitability for various structures. 
• Dr. Fixit Self Adhesive:Provides detailed information on water impermeability, thickness, softening point, and operating temperatures. 

In summary, self-adhesive aluminum membranes offer a convenient and effective waterproofing solution with a range of benefits, including ease of installation, flexibility, durability, and protection against water and UV damage. 

Conbextra Tie Rod Grout is typically meant for applications offi lling tie-rod holes, core cut holes in concrete, brick masonryand in natural stones and joints of paver blocks or fl ag stonesin paving work. Can also be used for pointing in stone or brickmasonry to retain structural integrity.Advantages:The mixed grout mortar exhibits stability during applicationand in hardening stages without shrinkage and debondingfrom the parent substrate Pre-packed, factory controlled. Only addition of water isrequired at site. Very low water permeability, making it highly durable forfor better water absorption resistance. Self-curing, gun grade and negligible waste duringapplicationThixotropic can be applied for both vertical andhorizontal application.Off ers excellent consistency during applications givinga smooth, fi nish.Exhibits very good pull off adhesion strength with thesubstrate.Description:Conbextra Tie Rod Grout is supplied as ready-to-use drypowder. The addition of a controlled amount of clean water thatproduces a high strength, non-shrink pumpable consistencyis excellent for applications in tie rod holes and cores that arecut during the construction activity.Conbextra Tie Rod Grout is a careful blend of Portland cement,graded fi llers and chemical additives which impart controlledexpansion in the plastic state whilst minimizing waterdemand. The graded fi llers are designed to assist uniformmixing and produce a consistent quality mix.

Description Dr. Fixit  Primer AC is a single component waterborne Anti-Corrosion Primer for Metal and Concrete substrates providing excellent adhesion and corrosion protection. lt is a fast drying primer with excellent adhesion over a wide range of metal substrates.

"Mild Steel Silico Create TIE ROD GROUT" refers to a cementitious, non-shrink grout, specifically designed for filling tie-rod holes in concrete structures, particularly those created by Mivan shuttering technology. 

Product Description Application Suitable Substrates Technical Properties Special Features & Standard Followed IS: 15477 - 2019 classified as TYPE-5 TS2 Adhesive EN 12004 / IS0 13007: Classified as an R2T Adhesive Easy to use and creamy mix consistency to work High elasticity, extremely flexible and resistant to ageing Highly thixotropic and non-sag formula Superior bonding and UV Resistance with stability to Thermal shock Suitable for all size tiles and stones fixing Suitable for internal & external wall applications with all type of vitrified tiles and stones Suitable for granite, marble, composite marble all types of natural stones and large scale tiles Ideal for marble and natural stone installations on various types of substrates Ceramic Tiles, Vitrified Tiles, Glass Mosaic & Glass Tiles, Large size tiles Artificial Stone / Engineered stones, Composite Marble Wood, Plywood and its derivatives All non- absorbent substrates Non-porous surfaces such as glass, metal etc. Metal substrates - Aluminium, Brass, MS plates, etc. Humidity sensitive natural stones, marble & Granites Application Temp. range +10°C to +40°C THIXOFLEX - PU   is two component Polyurethane Adhesive, designed for permanent bonding of wide range of all types of tiles, glass mosaic, sensitive natural marbles, granite stones slabs and synthetic / engineered stone on interior & exterior walls and floor areas. THIXOFLEX - PU adhesive is also suitable for superior bond strength on substrates such as plywood, glass or metal. It also provides balanced thixotropic and superior performance elasticity ensured by the use of stabilized polyurethane resin for rapid and secure laying operations on high deformable and high-expansion substrates.

THIXOFLEX - PU   is two component Polyurethane Adhesive, designed for permanent bonding of wide range of all types of tiles, glass mosaic, sensitive natural marbles, granite stones slabs and synthetic / engineered stone on interior & exterior walls and floor areas. THIXOFLEX - PU adhesive is also suitable for superior bond strength on substrates such as plywood, glass or metal. It also provides balanced thixotropic and superior performance elasticity ensured by the use of stabilized polyurethane resin for rapid and secure laying operations on high deformable and high-expansion substrates.

RITEPOXY   ESG 1200 (Epoxy Stain-free Grout) is three component epoxy  grout, designed specially for use in filling up joints of ceramic tiles, vitrified tiles and joints, where hygiene is of utmost importance such as bathrooms, kitchens, living room, bedroom, hospitals, laboratories, swimming pools, showrooms, airports  and high traffic areas. RITEPOXY  ESG 1200 is easy to apply and recommended for internal & external floors and wall applications. It is chemical resistant joint filler and is available in more than 28 shades.

CGU (Cementitious Colour Grout) is white cement based, polymer modified colour grout. It is right bonding materials to fill tile joints to fix ceramic & vitrified tiles on walls and floors. They are resistant to shrinkage and cracking and can be used to fill tile joints (walls and floors) with a minimum width of 1 to 5 mm for both interior and exterior applications. Made with colour fast pigments and fine graded aggregates. It is available in 28 colours to match your joints with tiles. 

MYMIX Ritebuild BJM is a thin-bed, high-strength, pre-mixed mortar for laying bricks and blocks, made with Portland cement, specially graded sand, and polymer admixtures, designed for easy application and high bonding.