Venus Enterprises

PAR CRYSTALLINE
Cementitious Concrete Waterproofing
PAR CRYSTALLINE is a cementitious, brush applied, waterproofing treatment for concrete. When it is mixed with water & applied to concrete, it penetrates into the concrete mass protecting against the passage of water.

PAR CRYSTALLINE react chemically to form billions of needle like crystals which blocks the pores, voids & micro cracks in concrete.Pre saturation & subsequent re- wetting of the surface will cause deeper diffusion of the organic chemicals & formation of crystals at greater depth. It may take from seven days to one month to reach its maximum waterproofing capability, depending on the thickness of concrete. Environmental factors such as ambient temperature, density of concrete, moisture present & weather conditions all can effect the timing of sealing process. Under dry conditions, PAR CRYSTALLINE lies dormant. However it becomes reactive whenever it is re-exposed to moisture.
PAR CRYSTALLINE contains active waterproofing chemicals which react with moisture and unhydrated cement in the concrete, creating insoluble crystalline complexes which seal the capillaries and minor shrinkage cracks. They penetrate even against strong hydrostatic pressure, becoming an integral part of the concrete. The waterproofing chemicals remain active for the life of the structure, permanently sealing it from water penetration.

Dr. Fixit PU Sealant is a one-part polyurethane joint sealant suitable for horizontal and vertical use. Dr. Fixit PU Sealant meets the requirement of ASTM C920 and ISO classification F25LM.

XDr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, many additives & water as a medium. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms. Areas of Application } All types of exterior masonry surfaces, concrete, cement sand renderings, etc. } Applicable on asbestos sheets. Features & Benefits } Film thickness - Higher film thickness provides resistance to the movements of structures, gives crack bridging ability & waterproofing properties. } Flexibility - Flexible and covers hairline cracks(upto 0.5 mm) effectively so that no ingress of water. } Toughness - Tough films withstands wind driven rain. } Elasticity - High elasticity easily withstands stress caused by thermal expansion & contraction (>100% elongation at 110-120 micron DFT). } Ready to use – No dilution is required hence ensures desired film thickness built-up without affecting the performance. } Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value. } UV resistant – Resistance to UV (Sun light) hence coating has longer life. } Dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics. } Breathability - Permeable to water vapour. } Ease of application – User friendly, easily applicable by brush, roller or spray. } Toxicity - It is Non-toxic. Method of Application 1 SURFACE PREPARATION } All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface coating. } Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical means such as wire brushing & shot blasting . } Finally vacuum cleaning of all loose solids and liquids can be done, if required. } All surface cracks upto 5 mm width should be filled up with Dr.Fixit Crack-X or Dr.Fixit Unifiller. Cracks more than 5 mm and all separation gaps should be filled up with Dr.Fixit Pidicrete URP or Dr.Fixit Unibond SBR modified mortar or as specified. 2 Priming } Prime the surface with Dr. Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part water) and allow it to dry for 2 to 3 hours

Dr. Fixit TankPro W is a two-component, solvent-free, thixotropic coating, based on high quality elastomeric polyurethane resins. After polymerization, it produces a strong, elastic, hydrophobic membrane suitable for waterproofing and protection of water tanks. Areas of Application Waterproofing and protection of: } Water tanks made of reinforced cement concrete (RCC). } Prefabricated concrete tanks. Features and Benefits } Excellent adhesion on RCC surface. } Being solvent-less, it can easily be applied in closed spaces. } Extremely hydrophobic and hydrolysis resistant. } Certified for potable water tanks, in accordance with the US FDA 175.300 requirements. } Single coating for Waterproofing and Protection for water tanks giving faster turaround time. Method of Application 1 GENERAL SURFACE PREPARATION: } Surface needs to be made clean, dry and sound, free of any contamination by wire brushing, which may affect the adhesion of the membrane to the substrate. Substrate concrete compressive strength should be cured for 28 days and achieve minimum 20 MPa compressive strength. Wash the concrete substrate with water pressure jet to remove all loose particles and dust. } Ensure the substrate has properly cured and the concrete is profile free, no ridges or troughs. All contaminants should be removed by mechanical vacuum assisted preparation equipment such as scrabbling/shot blasting/ diamond grinding to achieve a light abrasive blast to achieve preferred surface profile of CSP 4 or CSP 5. } If concrete surface found to be defective with pinholes/bug roles/honeycombs etc., it must be filled/ repaired using scratch coat prepare by mixing Dr. Fixit Superseal P200 WB and Dr. Fixit Superseal P100 aggregates in 1:1 ratio. Apply the scratch coat by using suitable spatula/squeeze to get level surface for the upcoming primer. 2 REPAIR OF CRACKS AND CONSTRUCTION JOINTS: } Existing surface cracks which are more than 1 mm and construction joints should be cut open in square or V -groove manner up to 10 mm width by using mechanical cutter. } Clean the groove with air blower to remove dust, dirt etc. primmed the groove with Dr. Fixit Pidiprime A and allow it to dry for 2-3 hours. } Slide the Feviseal PU/Hybrid Sealant into the applicator gun; extrude the sealant into the cracks ensuring that no air is trapped inside. } The treated cracks require minimum 6 hours to set and allowed to cure completely for a day. (Self-curing according to the room temperature). 3 CORNER TREATMENT – WALL TO FLOOR AND WALL TO WALL JOINT: } Moisten the surface with water & apply a bonding coat of Dr. Fixit Pidicrete URP and cement (1:1) by volume on cleaned RCC surface. Place angle fillet / coving by using Polymer modified mortar prepare with 1 kg Dr. Fixit Pidicrete URP, 5 kg fresh cement, and 15 kg graded quartz sand. (i.e., in the ratio of 1:5:15) on all along the joint RCC surface (slab and wall junction) and smooth finish. } Alternatively, V” grooves shall be cut along the wall & slab joints or construction joints for 10 x 10 mm using a hand cutter. } After cleaning the groove thoroughly, apply one coat of Dr. Fixit Pidiprime A primer and fill the gap with Feviseal Dr. Fixit TankPro W P

MARISEAL 275 is a liquid-applied, permanent-elastic, cold-applied and cold-curing, polyurethane membrane used for longlasting waterproofing. Product Information • One-component, ground & air moisture-cured cold-applied and cold-curing, solvent-based, aromatic polyurethane Packaging • 25 kg metal pails Color  • Grey Shelf Life • 12 months from date of production Storage Conditions • Pails should be stored in dry and cool rooms. Protect the material against moisture and direct sunlight. Storage temperature: 50-350C.  Products should remain in their original, unopened containers, bearing the manufacturers name, product designation, batch number and application precaution labels. Advantages • Simple application (roller or airless spray) • Based on pure elastomeric hydrophobic polyurethane resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties • When applied forms seamless membrane without joints • Resistant to stagnating water • Resistant to frost • Crack-bridging • Provides water vapor permeability, so the surface can breathe. • Maintains its mechanical properties over a temperature span of -30oC to +90oC • Provides excellent adhesion to almost any type of surface • Resistant to detergents, oils, seawater and domestic chemicals. • Even if the membrane gets mechanically damaged, it can be easily repaired locally within minutes 

Dr. Fixit PU Plain Injection is highly reactive two component polyurethane for cracks in concrete or masonry and serves as horizontal water stop against capillary rising moisture in brickwork, stone work, etc. Dr. Fixit PU Plain Injection has high penetration, quick setting and forms tough & flexible polyurethane rubber after complete chemical reaction. which reacts to create a flexible water-resistant sea.

F O R C AT H O DI C P R O T E C T I O N T O R E - B A R S & S T EEL SU R - FA C ES Dr. Fixit Epoxy Zinc Primer Description Dr. Fixit Epoxy Zinc Primer is a two-component system based on metallic Zinc and epoxy resin, hardener & additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coating on steel reinforcement or steel surfaces as an anti corrosion primer. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Areas of Application For coating of re-bars and steel surfaces. Features & Benefits } Passivation - Active zinc-rich system combats corrosion by electro chemicals means. } Ease of application – Easy to mix & applicable by brush or spray. } Time saving – Saves time because it dries quickly (touch dry time 15 to 45 minutes). } Compatibility – Excellent compatibility and suitable primer for steel surfaces and can be over coated by epoxy or polyurethane coatings. } Bonding – Bonds strongly to cement concrete & mortars. } Chemical resistance – Resistance to commonly used acids & alkali. Method of Application 1 SURFACE PREPARATION } Expose fully any corroded steel in the repair area and remove all loose scale and corrosion deposits. Care should be taken to clean the back side of exposed steel bars as well. Grit blasting is recommended for this purpose. } The application of Dr. Fixit Epoxy Zinc Primer must take place immediately on a dry steel surface after completion of the preparation work and not later than three hours.

Dr. Fixit Roofseal Ultra is a next-generation, liquid-applied, polyurethane hybrid roof topcoat waterproof coating with Flutyne protection technology. Designed to resist water intrusion and heat, it forms a highly elastic, seamless membrane that provides excellent protection from moisture and is resistant to ponding water. It also exhibits excellent resistance to UV radiation and thermal aging.

Dr. Fixit Concrete Guard is a solvent based composition of acrylic solution polymer, properly selected & graded inert fillers, light fast pigments & additives. It is specially formulated to protect reinforced concrete and other masonry cementitious substrate that 

Dr. Fixit Construction Foam is a one component expanding multi - purpose polyurethane foam used for a wide range of building applications, sealing window and door-frames, filling gaps around pipes, between wood and brick, sealing cracks and crevices.

Applications

• Dr. Fixit Construction Foam offers excellent properties
• Door and Window installation.
• HVAC installation dust gaps around wall.
• Sound insulation and absorption.
• Gaps around pipe fittings.

Features

• One component, no need for previous mixing.
• High foaming speed.
• Excellent adhesion on most of construction materials without primer.
• Very good insulating properties.
• Very good dimensional stability.
• Cured product can be painted drilled or cut.

Packaging
Dr. Fixit Construction foam type 750 ml Canister

Dr. Fixit Raincoat Waterproof Coating is composed of high quality emulsion polymer, weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings.

Dr. Fixit Fast Flex is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, applying by using a brush and roller or trowel. Can be painted or overlaid. Use with waterproofing for non-toxic water tanks, can be used with drinking water. (Passed the water quality test on toxic substances (heavy metals) of the Water Quality Control Department) Provincial Waterworks Authority. After mixing the two parts together, the liquid material can be applied on the desired surface. After drying, it looks like a rubber sheet. It has the property to prevent water seeping through, seamless and flexible, not cracking. Japanese standard 

Dr. Fixit Raincoat Classic is composed of high quality acrylic emulsion polymers that have weather durable pigments, which have been carefully selected & graded along with fine fillers, additives & bioci

Dr. Fixit Piditop 333 is a cementitious floor harden fresh concrete surface. It is non-metallicaggregates, resistance to abrasion and scratch, increased resistance to oils and grease andDr. Fixit Piditop 333 is easily use and cost saving.

Area of Applications

• Loading & unloading areas, warehouse floors, ramps and trucking lanes, car parks and garage floors.

Applications

• Dr. Fixit Piditop 333 should be applied in 2 shakes, using approximately two in thirds of
• the total quantity for the first broadcast. The dry powder is evenly broadcasted over the
• surface at the rate of 5 kg /m²
• This top layer shake at the rate of approx. 3 kg /m² should then be power floated or
• wooden floats are to be used to press the powder into the substrate surface. Once the
• floating is completed all over the surface uniformly, the second shake at the rate of
• approx. 2 kg./m² should be broadcasted evenly over the surface immediately, provided
• water is seen on the surface of the concrete.
• For final surface finish, a flat steel trowelling, or power trowelling can be done.
• Can be polished wax after leave 3-7 days

Packaging :- 25 kg / bag

Storage : Shelf life 12 months in sealed container out of direct sunlight.

Dr. Fixit Raincoat Select is composed of high quality acrylic emulsion polymers that have weather durable pigments, which have been carefully selected & graded along with fine fillers, additives & biocides. It is used as a waterproofing & protective coating for the exterior walls of the building. Raincoat Classic's coating is known for its supreme flexibility, breathability & water resistance that provide the structure its much needed protection for a period of upto 10 years.

Buy Dr Fixit Raincoat Select White 20 L – premium exterior waterproof wall & roof coating with superior seepage protection. Ideal for terrace, balcony & facade. Dr Fixit Raincoat Select White is a premium exterior waterproof wall and roof coating specially engineered to protect surfaces from water penetration, seepage, dampness and monsoon impact. Its high-performance elastomeric formulation provide

Dr. Fixit HDPE Prebond E Roller is a high performance pre-applied waterproofing membrane made of high density polyethylene (HDPE) laminated with pressure sensitive adhesive and protective film. It is designed for below ground waterproofing systems where membrane is applied before concrete pouring, creating a fully bonded waterproof barrier with concrete.
. Key Features

• Pre-applied system (applied before concrete)

• Fully bonded to concrete after casting

• Excellent resistance to water & chemicals

• High puncture & tear resistance

• No water tracking between membrane & concrete

• Ideal for basements & raft foundations

. Typical Applications

• Basements & foundations

• Raft slabs

• Retaining walls

• Lift pits

• Underground structures.

• Podiums & parking areas  

. Coverage

Roll Size: 2.4 m x 20 m = 48 sq.m per roll

1.HDPE waterproofing membrane

2.pre applied waterproofing membrane

3.basement waterproofing membrane

4.Dr Fixit prebond

 

5.foundation waterproofing

We are Dealer / Distributors of
Dr.Fixit, Fosroc, Sika, STP, BASF, Ascolite, Walplast, ACC, Ultratech, Berger, Asian Paints, Asian Smartcare, 
Ready Mix Plaster, 
Block Jointing Mortar,
Glass Fiber,
KDM Glass Fiber,
Non Woven Geotextile Membrane,
APP Waterproofing Membrane,
HDPE waterproofing membrane,
TPO Waterproofing membrane,
PVC Waterproofing Membrane,
EPDM Waterproofing Membrane,
Polymer Mortar,
Micro Concrete,
Foundation Groutts,
Conbextra GP2,
gnator,
Concrete Admixture.

POLYSULPHIDE JOINT SEALANT PRIMER.Dr. Fixit Pidiprime A is a single component primer for polysulphide sealant application to metal, glass, wood and cementitious surfaces. Typical Applications } } } Metallic surfaces; aluminum, brass, steel, etc. }Glass. } } Porous surfaces such as concrete, plasters and wood. Features } } } Ready to use. }Quick drying. } }Strong bond. Packaging 1 ltr Method of Application 1 SURFACE PREPARATION } } Joint surfaces must be sound, thoroughly clean and dry and free from grease, oil any other contamination. All dust and debris must be removed by wire brushing, grinding and vacuuming. Damaged joints should be repaired using a suitable mortar from the Pidilite range. } } } Clean glass and metallic surfaces with acetone solvent to remove oil and other contaminants. } Fix masking tape on both sides of joint surface to provide a neat appearance. 2 APPLICATION } } } } Shake the container to disperse any settlement and brush apply two coats over the prepared surfaces allowing 30 minutes and a maximum of 3 hours between coats. } Allow the second coat to dry for 30 minutes and a maximum of 8 hours before application of sealant. Note: Nonporous substrates require only a single coat. } Should the maximum times be exceeded, the cured primer should be lightly abraded and a fresh coat applied.

EXPANSIVE PLASTICISING ADMIXTURE & GROUTING AID FOR CEMENTITIOUS GROUTS Description Dr. Fixit Pidicrete AM is  composed of plastisizers, expansion additives, polymers & defoamer. It is used for producing cementitious injection grouts for pressure / gravity injection  into concrete structures, for producing cementitious grouts, which are suitable for bed grouting, duct grouting, filling etc. because it provides plastisizing action which improves flow, expansion additive provides shrinkage compensation after curing & high compressive strength.

Dr. Fixit Fast Flex is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, applying by using a brush and roller or trowel. Can be painted or overlaid. Use with waterproofing for non-toxic water tanks, can be used with drinking water. (Passed the water quality test on toxic substances (heavy metals) of the Water Quality Control Department) Provincial Waterworks Authority. After mixing the two parts together, the liquid material can be applied on the desired surface. After drying, it looks like a rubber sheet. It has the property to prevent water seeping through, seamless and flexible, not cracking. Japanese standard.

Dr. Fixit Fastflex is a 2-component cement-based waterproofing material, which is powdered (fine sand, sizing), liquid (modified acrylic polymer) and nontoxic substances, environmentally friendly - free Vo

In structural repairs, especially in hard-to-reach or congested reinforcement areas, conventional concrete falls short. That’s where Dr. Fixit Micro Concrete becomes a game-changer. This ready-to-use, non-shrink, free-flowing repair material is speciWettingPre-wet the prepared surface with clean water for at least 30 minutes.Ensure the surface is a saturated surface dry (SSD) before pouring micro concrete.Step 3: ShutteringFormwork must be strong, waterti

Dr. Fixit Crack-X Powder is a cement based polymer modified powder material for filling cracks in plastered surface. It is composed of cement, properly selected aggregates, polymer & additives which requires on site addition of water only. It is ideal to fill 3 to 5 mm wider static cracks. Cracks filled with Dr. Fixit C

Roofseal Classic is a white elastomeric coating that offers both waterproofing and heat insulation.
✅ Reduces internal temperature by 3–5°C
✅ Terrace waterproofing + heat reflective
✅ 

Dr. Fixit Roofseal Top Coat is a single component, insulating elastomeric waterproof coating for roofs tor crack bridging and long lasting tough weather protective seal for exposed 

Dr. Fixit Concrete Guard WB is a water based composition of acrylic polymer, properly selected & graded inert fillers, light fast pigments & additives. It is specially formulated to protect reinforced concrete and other masonry cementitious substrate that is directly exposed to atmospheric conditions lik

Dr. Fixit Raincoat WPC is a waterproof coating solution for walls and roofs.Offers superior protection against water seepage and leakage.Easy to apply and highly durable in heavy rainfall.Ideal for both residential and commercial use, ensuring long-lasting water resistance.

Dr. Fixit Raincoat Waterproof Coating is a Basecoat, composed of high quality acrylic emulsion polymers that have weather durable pigments, which have been carefully selected & graded along with fine fillers, additives & biocides. It is used as a waterproofing & protective coating for the exterior walls of the building. Raincoat WPC's coating is known for its supreme flexibility & water resistance that provide the structure its much needed protection for a period of upto 5 years.
Key Features

• Excellent waterproofing performance
• Flexible & crack-bridging
• UV & weather resistant
• Breathable coating (no trapped moisture)
• Easy brush / roller application
• Long-lasting monsoon protection

Typical Applications
Exterior walls (residential & commercial)
Terrace parapets
Balconies & façade
Retaining walls
Concrete surfaces exposed to rain.

Buy Dr Fixit Roofseal Classic 20 L – elastomeric acrylic roof waterproofing coating for terraces & slabs. Ideal for monsoon leakage and crack bridging. Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based o

 

Asian Paints Smartcare Acrylic Bonding Chemical Asian Paints SmartCare Acrylic Bonding Agent is a single component white emulsion which is based on modified acrylic co-polymers. It is formulated to be used as a bonding agent for cementitio

Dr. Fixit Pidicrete WP acrylic co-polymer liquid, which when mixed with cement, forms a matrix & hence provides excellent waterproofing properties. It can also be used as a bonding agent for new to old

Waterproofing Chemicals Mumbai.
Dr Fixit Dealer.
Terrace Waterproofing Material Supplier.
Quick and easy to apply. Designed for use with joint compound for reinforcing joints and corners in gypsum drywall interiors. Special cross-fiber papers offers tensile strength both with and across the paper grain. Exceptional wet strength. Resists stretching, wrinkling and other distortions. Roughened surface provides superior bond to joint compound. Positive center creasing and uniform wind for accurate, trouble-free application to angles and flat joints. 

Hydrophilic water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. Retains its own shape after multiple dry-wet cycles. Mechanical fixation is recommended with BeSealed fixing glue for water swellable sealing profiles. Alternatively, Polybar+ can be fixed by nailing. USE  Designed for the easily applied sealing of construction joints in concrete and reinforced concrete construction. POLYBAR+ seals against non-pressing and pressing ground water up to 6 bar. POLYBAR+ can be used in repeated wet and dry cycles.  The sealing bars should in all instances be square butted and tight to ensure a continuous section with a minimum of 60mm concrete cover.  POLYBAR+ can be applied both vertically and horizontally but under no circumstances should it be used in expansion joints. DESCRIPTION  Swellable water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. POLYBAR+ retains its own shape after multiple wet and dry cycles.  POLYBAR+ has a good resistance to a wide range of chemicals. Final confirmation about compatibility under specific conditions can be obtained from our technical dept.  The product remains consistent in its performance throughout its life cycle and the flexibility allows it to fill voids and cracks in the immediate surrounding area. APPLICATION  Mechanical fixation is recommended with BeSealed fixing glue. Alternatively, the Polybar+ sealing bar is fixed by nailing at aprox. 300mm centres.  The product can be adhered to concrete, steel and PVC pipe penetrations with BeSealed fixing glue.  The fixing glue ensures a good bond even on slightly uneven surfaces and wet concrete surfaces (See separate TDS for detailed information)  The use of a tying wire around POLYBAR+ in the case of securing it to PVC pipes is also recommended in conjunction with the adhesive.  For salt water environment, in polluted water conditions and in contact with manure and slurry, we recommend POLYBAR+ Salt (See separate TDS). 

CEMENTITIOUS NON-SHRINK RAPID SETTING MULTIPURPOSE MORTARDESCRIPTIONMASTERPLUGMASTERPLUG-3 is a fast sealing cement based product formulated with selected additives. Itsets very fast within a few minutes. It is used in a situation where very quick setting is required.It is effectively used for stopping the flow of run ning water. It is an ideal material to stopleakages prior to the application of waterproof renderings in basements.FEATURES / ADVANTAGE It is ready to use product and requires only the addition of water at site before plugging and sealing cracks. It sets very rapidly thereby, stops leakages. It stops running water, reducing damage. It is cementitious product and hence it is economical. It can be used where quick setting under water is required. It is non-shrink as it expands on setting. It bonds to the substrate very well. It does not affect RCC as it is free from chloride.TYPICAL APPLICATION Used for leak-plugging in running water. Used in all places where quick setting is required. Used for all plugging work, quick repairs of concrete, screed, plaster and brick work. Used for basement and manhole repairs. Used for concrete pipes repairs. Used for anchoring of bolts and hand rail setting

• Selsil Ultra Tack Black (600ml) is a high-strength, one-component adhesive and sealant.
• Provides excellent adhesion to various surfaces, including metal, glass, wood, and plastics.
• Resistant to weather, UV, and temperature variations, making it ideal for indoor and outdoor applications.
• Non-sagging, flexible, and durable, suitable for construction, automotive, and industrial uses.

  

Dr. Fixit Fast Flex is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, a

High-quality, waterproof sealing tape designed for use in bathrooms and wet areas.Provides a strong, long-lasting seal around bathtubs, showers, and sincommon bathroom surfaces.Resistant to moisture, mold, and mildew, ensuring durability and effective protection in high-humidity environments.