Venus Enterprises

Key Applications :  For Building cracks, Wall Cracks, Expansion Joints, Terrace Waterproofing,Bathroom Waterproofing, Roofing ( Asbestoes / Cement Mild steel, Galvanised Iron / FRP sheets ), corrugated roofing, sealing of PEB structures, Storage tanks and joints

BM SEAL is a superior grade bituminous waterproofing membrane manufactured by blending a mixture of bitumen and SBS (Styrene Butadiene Styrene) polymers are reinforced with non-woven polyester mat having thermo fusible polyethylene film on both sides. They have phenomenal waterproofing qualities alongside exquisite mechanical properties such as tensile strength, tear strength and puncture resistance. They provide good UV resistance and are quite durable.

Trade Names: Ice Buster II™, MFM SubSeal™, MFM Peel & Seal®, MFM Peel & Seal® 250, MFM RidgeSeal™, MFM Window Wrap™, MFM Window Flashing, MFM DoubleBond™, MFM Wind and Water Seal™, Premium Wind and Water Seal™, MFM Seal and Coat™, MFM FlexClad-400™, MFM FlexClad-250™, MFM FutureFlash®, ShingleStarter™, MFM Peel & Patch™, STS Underlayment™, IB-3™, IB-3 Storm Stopper™, IB-4™, Storm Stopper FSU™, MFM Peel & Roof™, MFM Deck Wrap™, MFM Roof Deck Tape™, MFM Window Wrap Flex™, MFM W3 Tape™, MFM EIFS Tape™ 

Description Dr. Fixit Samshield XL is a SBS self adhesive waterproofing membrane based on a tropical grade of polymer modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, HDPE Valeron® film. The membrane is protected on the self adhesive side with a silicone coated release film. Typical Applications Dr. Fixit Samshield XL used as waterproofing and damp proofing intended for concrete protection. It may be used for horizontal and vertical application and as a damp proofing course for tanking below ground structures, subways, retaining walls etc. Features } Specially formulated for tropical climate grade. } Provides protection against water and vapour. } Self adhesive, requires just peeling off the silicone film and sticking to the surface. } Excellent adhesion to vertical and horizontal surfaces. } Excellent resistance to chlorides, sulphates, alkalis and acids. } Good tear and puncture resistance. } Excellent tensile strength. Method of Application Application procedure may vary slightly depending upon site conditions. The general recommended guidelines for the application of the self adhesive waterproofing system are as follows: 1 SURFACE PREPARATION The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil and grease. All surface imperfections, protrusions, structurally unsound and friable concrete must be removed and repaired with a suitable concrete repair mortar. 2 PRIMING Apply Dr. Fixit Torchshield Primer @ 4-6 sq.mtrs./litre to a clean, smooth and dry surface by brush or roller. Allow the primer to dry prior to the application of the membrane. As the viscosity of the primer is low, it easily penetrates into the concrete pores which promote the adhesion between the membrane and the concrete surface. In addition to that the primer also acts as a binder for the dust which gets accumulated on the concrete surface even after cleaning. 3 ALIGNMENT Start the installation of all membrane plies from the low point, so that the flow of water is over or parallel to the plies, but never against the laps. Begin membrane application by unrolling the roll of Dr. Fixit Samshield XL membrane and aligning the side laps. Application Peel off the release film from the self adhesive side and start unrolling the membrane and press it to the surface. Smoothen the membrane from the center to the edges with a wooden press in order to remove entrapped air. Furthermore, an iron roller shall be used for rolling on top of the applied membrane to ensure a proper and strong adhesion of the bitumen compound with the base surface. Side overlaps shall be a minimum of 75 mm on the selvedge and end overlaps 100 mm.

Bituminous APP Waterproofing Membrane.Available in 3 And 4MM Thick. Brand - Dr. Fixit, Sika, STP, Asian Smartcare 

SmartCare PVC Membrane
Non-reinforced Smartcare PVC membrane B01 & B02, opaque, made of flexible polyvinyl chloride (PVC-P), with thin yello signal layer (PVC-P0, designed for tunnels and basement works, this membrane is not suitable for permanent exposure to UV-radiation.

HDPE liner is resistant to many different solvents and are the most widely used geomembrane liner in the world. Although HDPE geomembrane is less flexible than LLDPE, it provides higher specific strength and can withstand higher temperatures.

Asian Paints SmartCare Waterproofing Membrane is a APP modified glass fiber sheet reinforced bituminous membrane for superior waterproofing. This membrane exhibits excellent tensile strength, tear strength, puncture resistance and dimensional stability. The torch side of the membrane is covered with polyethylene film for protection of the membrane.

SmartCare waterproofing membrane is a APP modified polyester fleece reinforced bituminous membrane for superior waterproofing.
Excellent flexibilityExcellent water tightness if applied as per recommended system and application.basements and raft slabs.Swimming pools.Roof Gardens.Underground car parks etc.Bridges & Tunnels.

Dr. Fixit Prebond membrane is a preformed HDPE fully bonded membrane that bonds to the wet concrete cast on the membrane. After the membrane bonds with the concrete it forms an integral seal which prevents lateral water migration and makes it unaffected by any substrate settlement below the slabs. Reinforcement can be directly laid on top of the membrane and it does not require screed protection. Dr. Fixit Prebond is a unique HDPE membrane comprising of a virgin HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective layer. The adhesive layer is activated when the concrete is poured on the membrane and it enables the membrane bond to underside of the concrete which prevents the ingress of water into the structure as well as prevents tracking of water between the membrane and the structure and provide a positive side protection against ingress of sub soil water. Dr. Fixit Prebond can be used for horizontal as well as vertical blind side application.

Typical Application

• Basement. 
• Subway and UG metro project. 
• Cut and cover tunnels. 
• Caverns.
• Other underground civil structures.     

Features

• Good bonding with concrete applied on membrane, to protect concrete effectively.
• Low flatness requirement to substrate; reliable overlapping; fast and easy application. 
• Sound anti-puncture performance.
• Adaptable to varying surface profile.
• Resistant to high hydrostatic ground water-pressure.
• Resistant to acid, alkali, chlorides and sulphate attack.
• Eco-friendly material.
  
  

Method of Application
Dr. Fixit Prebond membranes are supplied in rolls of 2.0 m or 2.4 m wide, with a selvedge of 75 mm on one side to provide self-adhered laps for continuity between rolls. The rolls of Prebond membrane and Prebond Tape are inter-wound with a disposable plastic release liner which must be removed before placing reinforcement and concrete.

Dr. Fixit Prebond membrane is a preformed HDPE fully bonded membrane that bonds to the wet concrete cast on the membrane. After the membrane bonds with the concrete it forms an integral seal which prevents lateral water migration and makes it unaffected by any substrate settlement below the slabs. Reinforcement can be directly laid on top of the membrane and it does not require screed protection. Dr. Fixit Prebond is a unique HDPE membrane comprising of a virgin HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective layer. The adhesive layer is activated when the concrete is poured on the membrane and it enables the membrane bond to underside of the concrete which prevents the ingress of water into the structure as well as prevents tracking of water between the membrane and the structure and provide a positive side protection against ingress of sub soil water. Dr. Fixit Prebond can be used for horizontal as well as vertical blind side application.

Dr. Fixit Prebond S membrane is a preformed and pre applied HDPE fully bonded membrane that bonds to the wet concrete cast on the membrane. After the membrane bonds with the concrete it forms an integral seal which prevents lateral water migration and makes it unaffected by any substrate settlement. Reinforcement can be directly laid on top of the membrane and it does not require screed protection. Dr. Fixit Prebond S is a unique HDPE membrane comprising of a HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective sand particulate layer. The adhesive layer is activated when the concrete is poured /cast on the membrane and it enables the membrane to bond to the underside of the concrete which prevents the ingress of water into the structure as well as prevents tracking of water between the membrane and the structure thereby providing a positive side protection by virtue of an external tanking system against ingress of sub soil water. Dr. Fixit Prebond S can be used for horizontal as well as vertical blind side.

BM SELF AL is a cold applied self-adhesive, flexible, waterproofing and protection membrane made from rubber modified bitumen compound with Aluminum surfaced solar reflective film on its upper side as protection layer. It has a detachable silicone film on the underside.

Bm Board / Bm Board A Are Polymer Modified Bituminous Waterproofing Membrane, Which Are Reinforced With Glass Fiber Manufactured From A Mixture Of Bitumen And Selected Polymers. They Are Guarded With Two Sides Thermo Fusible Polyethylene Film On Both Sides, Enhanced With Supreme Waterproofing Qualities, Coupled With Excellent Properties Such As Dimensional Stability And Puncture Resistance. They Have Good Uv Resistance And Are Quite Durable.