Construction Materials
Pioneers in the industry, we offer polypropylene fiber concrete, sika hyflex 160, fiber mesh roll dealer supplier distributor in mumbai, fosroc supercast sw 10 swellable waterstop for in-situ concrete, silico plast polymerised drymix plaster and backer rod 6mm 8mm 10mm 12mm 15mm to 50mm from India.
Polypropylene Fiber Concrete
Request Callback
₹ 125 / Kg Get Latest Price
Product Brochure
| Fiber Length | 3 mm |
| Usage/Application | Construction |
| Fiber Type | Polyester fiber |
| Pattern | Raw |
| Packaging Type | Loose |
| Country of Origin | Made in India |
Description PP Fiber is a micro reinforcement, manufactured of 100% polypropylene fi bers containing no reprocessed olefi n materials designed for use with all cemenƟ Ɵ ous mixes. The inclusion of PP Fiber within a concrete mix or cemenƟ Ɵ ous mixes will control shrinkage cracks and will act as an alternaƟ ve to tradiƟ onal crack control steel mesh. Applications PP Fiber is ideally designed for use in the following applicaƟ ons: Slab on grade. Stamped concrete. Pre-cast concrete. Water tanks. Pavements. Shotcrete. Renders. Composite decks. Advantages Controls and inhabits crack formaƟ on in concrete. Reduce plasƟ c shrinkage and seƩ lement cracking. Available in variable lengths, 19 and 12 mm for concrete and stamped concrete. 3 and 6 mm for plasters and mortars. CompaƟ ble with all types of cement and concrete admixtures. Rust free. Standards PP Fiber complies with the requirements of ASTM C-1116- 1997, Type 3. Method of Use Mixing PP Fiber is added to the mixer before, during or aŌ er batching of concrete. Mixing speed and Ɵ me should be as per ASTM C-94. Packaging 40 mm fi ber length : 0.6 kg/bag 19 mm fi ber length : 0.9 kg/bag 12 mm fi ber length : 0.6 kg/bag 12 mm fi ber length : 0.9 kg/bag 3 and 6 mm fi ber length : 0.6 kg/bag Dosage Industrial fl ooring: 0.6 kg/m3 for 40 mm fi ber length. Concrete fl oors: 0.6 kg/m3 of 19 mm or 12 mm fi ber length. Stamped concrete: 0.6 kg/m3 of 12 mm fi ber length. Mortars and plaster: 0.6 kg/m3 of 3 mm fi ber length. Storage Store under cover away from heat sources. Cautions Health and Safety There are no health hazards associated with PP Fiber in normal use.
Sika Hyflex 160
Request Callback
₹ 390 / Piece Get Latest Price
Product Brochure
| Packaging Size | 20 Kg |
| Purity | 99 % |
| Form of Chemical | Slurry |
| Usage/Application | Waterproofing |
| Category | Cementitious Waterproofing |
| Country of Origin | Made in India |
- SikaHyflex®-160 is a high-performance, one-component, elastic polyurethane sealant for facade and expansion joints.
- Provides excellent adhesion to various substrates, including concrete, masonry, and metal.
- Highly flexible with durable weather and UV resistance, making it ideal for exterior applications.
- Low modulus and high movement capability ensure long-term performance in dynamic joints.
Fiber Mesh Roll dealer supplier distributor in Mumbai
Request Callback
₹ 650 / Roll Get Latest Price
Product Brochure
| Usage/Application | Plastering |
| Color | White |
| Width | 1 mtr , 100 mm, 150 mm |
| Size | 50 mtr x 1mtr |
| Brand | KDM & Un branded |
| 2000 | Rs |
Minimum order quantity: 5 Roll
iber mesh rolls, commonly made from woven fiberglass strands, are integral in construction for reinforcing surfaces, preventing cracks, and enhancing waterproofing. Their lightweight yet durable nature makes them suitable for various applications, from plastering to roofing.Fiber mesh rolls, commonly made from fiberglass, are essential in construction for reinforcing surfaces like drywall, plaster, and concrete. They enhance structural integrity, prevent cracking, and improve adhesion in various applications.iber Mesh Roll Overview
Material & Features:
-
Constructed from fiberglass, offering high tensile strength and flexibility.
-
Resistant to alkalis, moisture, and deformation.
-
Available in various mesh sizes (e.g., 0.4 cm to 0.7 cm) and roll dimensions (e.g., 1m x 50m).
-
Suitable for both interior and exterior applications.Amazon
Common Applications:
-
Reinforcing drywall joints and preventing cracks.
-
Strengthening plaster layers in walls and ceilings.
-
Enhancing adhesion in tile installations.
-
Providing structural support in EIFS (Exterior Insulation Finishing Systems)
Fosroc Supercast SW 10 Swellable waterstop for in-situ concrete
Request Callback
₹ 150 / Meter Get Latest Price
Product Brochure
| Material | Rubber |
| Color | Black |
| Brand | Fosroc |
| Thickness | 10 mm |
| Size | 5 Rmt |
| Surface Type | Cement |
| Usage/Application | As a water bar |
| 2000 | Rs |
Minimum order quantity: 50 Meter
Swellable waterstop for in-situ concrete*Uses*Integral sealing for construction joints in concrete castinsitu.Convenient and problem solving in situations where a conventionalwaterstop would require complex shutting.Typical uses include secant piled and diaphragm walled basements,pile caps and casting against old concrete.Supercast SW10 can provide simple solutions to detailing pipeentries, construction joints in the vertical plane and to kickerjoints.AdvantagesEasy to install Supercast SWX swellable adhesive enables full intergrationof Supercast SW10 and Supercast PVC networks Solves detailing problems in conjunction with SupercastPVC range Swelling properties unaff ected by long term wet/dry cycling Sustains eff ective seal in wet conditions Delayed swell action allowing extra tolerance on siteStandardsSuitable for use in contact with potable water - Water ByelawsScheme Approved product.DescriptionSupercast SW10 is a swellable waterstop that can be installedand positively linked into conventional Supercast PVC waterstopnetworks.This alows the use of Supercast PVC for expansion joints andSupercast SW10 for construction joints, all the time maintainingan intergrated network.Supercast SW10 is made from high performance syntheticelastomeric strips. The swelling action is the result of contactbetween water and hydrophilic groups which are part of theSupercast SW10 ‘Basic polymer’ molecular structure.The hydrophilic groups are not subject to extraction or lossof swelling performance by prolonged or repeated wetting.This is a unique feature of the basic polymer.
Silico Plast Polymerised Drymix Plaster
Request Callback
₹ 210 / Bag Get Latest Price
Product Brochure
| Packaging Size | 40 Kg |
| Ideal for Use at | SilicoPlast is a factory-made, ready-to-use, polymerized dry mix plaster designed for both internal |
| Model Number/Name | silico plast |
| Final setting time | 24 hours |
| Initial setting time | 60 min |
| Country of Origin | Made in India |
| 2000 | Rs |
Minimum order quantity: 40 Bag
SilicoPlast is a factory-made, ready-to-use, polymerized dry mix plaster designed for both internal and external plastering, ceiling plastering, and waterproofing, suitable for various brick types and concrete blocks. It is a cement-based, water-resistant plaster that requires only the addition of water at the site.
Backer Rod 6mm 8mm 10mm 12mm 15mm to 50mm
Request Callback
₹ 2 / Meter Get Latest Price
Product Brochure
| Material | EPE |
| Usage/Application | To fill the gaps |
| Color | White, Black, Grey and in Colour |
| Brand | Venus |
| Country of Origin | Made in India |
| 2000 | Rs |
| Thickness | 6mm, 8 mm, 10mm, 12mm, 15mm, 25mm, 40mm, 50mm, 60mm |
| Size | 12 mm |
Minimum order quantity: 5000 Meter
Backer rods are flexible, compressible foam rods used as backing material in joints or gaps before applying sealants. They help control the depth of the sealant, prevent three-sided adhesion, and provide a firm surface for tooling. Available in various diameters, they are essential in construction, glazing, and expansion joint applications.Merz Construction+5EPE Foam Roller+5H-B+5EPE Foam Roller+2H-B+2FoamNet Plastic+2
�� Backer Rod Sizes and ApplicationsBacker rods come in multiple diameters to suit different joint widths:
-
6mm to 15mm: Ideal for narrow joints in window frames, door perimeters, and small cracks in concrete.
-
20mm to 30mm: Suitable for medium-sized expansion joints in masonry walls and precast panels.
-
40mm to 50mm: Used for larger joints in infrastructure projects like highways, bridges, and large concrete slabs.H-B+2EPE Foam Roller+2Merz Construction+2Merz Construction
These rods are typically made from closed-cell polyethylene foam, offering benefits such as:EPE Foam Roller+3H-B+3Merz Construction+3
-
Excellent compression and recovery properties.
-
Resistance to moisture and chemicals.
-
Compatibility with various sealants, including silicone, polyurethane, and acrylic.
-
Lightweight and easy to install.Mahamaya Industries+5FoamNet Plastic+5Merz Construction+5H-B
-
Select the Right Size: Choose a backer rod diameter slightly larger than the joint width to ensure a snug fit.
-
Clean the Joint: Remove any debris, dust, or old sealant from the joint.
-
Insert the Backer Rod: Use a blunt tool to gently press the rod into the joint to the desired depth.
-
Apply Sealant: After placing the backer rod, apply the sealant over it, ensuring proper adhesion to the joint sides.H-B.
ACC Bagcrete Ready Mix Concrete
Request Callback
₹ 12000 / Cubic Meter Get Latest Price
Product Brochure
| Concrete Grade | M20 |
| Packaging Type | Bag |
| Brand | ACC |
| Type | Ready Mix Concrete |
| Pakage size | 40 Kg |
| Form | Powder |
General Description: “ACC BAGCRETE” is carefully proportional blend of high quality materials including well graded fine and coarse aggregates, ordinary portland cement & special concrete admixtures. After mixing with water at site ACC BAGCRETE is designed to produce a concrete mix that's easy to work with & provides excellent strength. The ACC BAGCRETE make it particularly suited for concrete jobs in &around the home & garden, remote access areas, native sites& wherever a good quality concrete mixes are required for structures of suitable application. This can be produced according to the different grades of concrete. Uses: Individual houses, Gardens, small concrete repair works, small structures foundations, columns and slabs etc. Applications:-1) RCC & PCC -Any filling &levelling works. 3) Terrace Waterproofing works. 2) Floorings. 4) Any other simple Concrete works. Advantages:- 1) Easy Storage. 3) Helps in uninterrupted business & minimises losses. 2) Helps in servicing the public. 4) Helps in higher productivity. Features:- 1) Manufactured and mixed in environment level of automation is high. 2) Can be customized to required strength and workability factors. 3) Can be made to order on other required parameters like waterproofing properties, fiber reinforced etc. Informations: Packing:- Specially designed Laminated bags which is moisture resistance & comes in usually 40kgs Bag design. Quantity Coverage:- The addition of 3-4 litres of water to a 40kgs bag of ACC BAGCRETE according to the site requirements & workability will produce around 18 litres of concrete, enough for a rectangular slab measuring 500mm ×500mm × 75 mm or it’s equivalent. Mixing Instructions:- A) Concrete Mixer 1) Put most of the 3-4 litres of water per 40kgs bag of ACC BAGCRETE dry mix into the mixer bowl & start mixer. 2) Gradually add ACC BAGCRETE dry mix while the mixer is rotating. 3) Add the remaining water only if necessary. B) Hand Mixing:- 1) Empty the ACC BAGCRETE dry mix bag into a wheel barrow, bucket or flat clean surface. Measure 3-4 litres of clean water per 40kg bag. 2) Gradually add the water on stages, mixing thoroughly with a spade or similar after each addition of water. 3) Check on the consistency of the concrete. Use no more water than is necessary to allow the concrete to be easily placed & finished. Quality Assurance:- The product confirms to BIS Specifications& standards. Aggregates used confirms to IS: 383 Cement confirms to IS : 12269, Water confirms to IS : 456 : 2007, Admixtures confirms to IS : 9103. Initial Setting Time observed:- 2 Hr 10 Min. Final Setting Time observed:- 9 Hr 35 Min. 28 Days compressive strength: Can be achieved as per requirements &customized solutions needed. Generally Available in the Three Strengths Class: Normal Strength : - 15 –20 Mpa Mild Strength :- 25 – 30 Mpa High Strength :- 35 – 40 Mpa
Magnicrete - Magniplast
Request Callback
₹ 200 / Bag Get Latest Price
Product Brochure
| Packaging Size | 40 kg |
| Maximum Applicable Thickness Per Layer | 15 mm |
| Construction Material Type | Powder |
| Usage/Application | Construction |
| Color | Grey |
| State/Form | Powder |
| Ideal for Use at | Internal and External plaster |
Minimum order quantity: 10 Bag
MAGNICRETE - MAGNIPLAST is high quality cement based water resistant ready to use plaster. This plaster is ideal for interior and exterior walls
Asian Apcorep Injection Grout LV
Request Callback
Get Latest Price
Product Brochure
| Number of Components | 2-Part |
| Features | Waterproof |
| Application Area | Industrial Areas |
| Pot Life | 45 min |
| Curing Time (Foot Traffic) | 24 hours |
| Finish | Glossy |
| Country of Origin | Made in India |
| 2000 | rs |
| Pack Size | 1kg |
| Packaging size | 20 Kg |
Minimum order quantity: 20 Litre
DescriptionSmartCare Epoxy LV two part, solvent-free, low viscosity epoxy resin system is mixed in the proportions supplied to form a strong permanent bond and seal in cracks in concrete and masonry.SmartCare Epoxy LV is designed to be injected into cracks using suitable resin injection equipment.SmartCare Epoxy LV highly penetrative and cures to form a permanent and rigid seal against the ingress of corrosive fluids and gases and is capable of restoring structural integrity to concrete elements.SmartCare Epoxy LV (onceUsesRepair and sealing of “structural” concrete cracks. The injection resin can be used to fill and bond structural cracks in: Columns, Bridge decks, Floors, Piers, Abutments, Tunnels, Basements, Beams, Underpasses etc.Characteristics/ Advantages Low viscosity allows penetration into the finest cracks Formulated for hot climates Suitable for structural repairs Excellent bond to concrete, brick and masonry Minimum creep under sustained load Resistant to wide range of chemicals Non-shrink, adheres with no loss of bond High compressive strength Can be used to fill wide cracks by gravity feed and as a fluid grout up to thicknesses of 9 mm
Ascolite Ready Mix Plaster ( Ready Mix Mortar FR )
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 40 Kg |
| Ideal for Use at | Plastering |
| Model Number/Name | Ascolite |
| Final setting time | 24 hours |
| Initial setting time | 2 hours |
| Country of Origin | Made in India |
| 2000 | Rs |
Minimum order quantity: 100 Bag
Ascolite Ready Mix Plaster is available in 40 Kg bagAscolite Ready Mix Plaster is a premixed, factory-made solution for plastering, designed to replace traditional site-mixed plaster. It consists of graded sand, cement, and performance-enhancing additives. Just add water to the premix before application. Ascolite offers Ready Mix Plaster in both standard and FR (with PP/glass fibers) variations, suitable for internal and external walls. The FR version provides, crack resistance, and durability. Key Features and Benefits:
- Pre-mixed: Requires only water to be added before application, simplifying the plastering process.
- Consistent Quality: Ensured by factory production, leading to a uniform plastering finish.
- Higher Strength: The FR version incorporates PP/glass fibers for enhanced strength and durability.
- Reduced Wastage: Pre-packaged and pre-mixed, minimizing on-site waste.
- Time and Cost-Effective: Faster application and reduced labor costs due to ease of use.
- Suitable for Various Substrates: Can be used on AAC blocks, CLC blocks, concrete blocks, hollow blocks, clay bricks, and fly ash bricks.
Ultratech Powergrout NS2 SP
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 40 Kg |
| Usage/Application | Construction |
| Type | Bag |
| Country of Origin | Made in India |
| 2000 | Rs |
UltraTech POWERGROUT NS2 is a cement-based, non-shrink, non-expanding, polymer enriched, high performance, high early strength and high quality binder for precision grouting applications. POWERGROUT NS2 is developed by using special polymers, additives and selected fillers. Variants POWERGROUT NS2 FLOWABLE POWERGROUT NS2 NORMAL Areas of Application METHOD OF APPLICATION Features & Benefits Specification Ready-to-mix single component system, no hassles of mixing the ingredients Excellent bond strength Non-shrink, Non-expandable grout Economical with graded coarse aggregates for higher volume applications Subsequent usage time in 24 hours Ultimate compressive strength Consistent in quality Enhanced flow properties and pot life Self-compacting in nature No bleeding and better consistency UltraTech POWERGROUT NS2 is recommended for grouting with design strength of 80 MPa for foundation base plates, machine foundations and beds, which demand high strength for micro piles and pile caps, shear wall bond beams, for fixing and anchoring the precast elements, for manufacturing of high strength pavers and blocks. Surface Preparation Prepare the surfaces before the application of UltraTech POWERGROUT NS2 by removing oil, bond inhibiting agents, dirt, dust and laitance with suitable methods like by using wire brush, water jetting, mopping, etc. Proper checking of reinforcement and other elements to be grouted need to be carried out as per the structural requirements before placing UltraTech POWERGROUT NS2. The shuttering has to be proper without any gaps or loose materials to ensure nil leakages during the usage of UltraTech POWERGROUT NS2 Appropriate anti-corrosion and bonding agents to be applied over the old and renewed reinforcement bars and metal areas and over old-new concrete joints before grouting Mixing UltraTech POWERGROUT NS2 requires 14-15 % of water by weight of material Add UltraTech POWERGROUT NS2 to the measured quantity of water with constant stirring using a mechanical mixing device. Mix to a thick lump-free consistency Allow to stand for 2 minutes for the mix to mature and then remix to use. Do not add any extra water to alter the mix consistency or to extend the pot life Further water additions will hamper the strength and adhesion properties of UltraTech POWERGROUT NS2 Addition of upto 12 mm down well graded aggregate in 1:0.5 ratio by weight can be done as per the site requirement For specific high volume applications addition upto 20 mm down well graded aggregates can also be used at 1:0.5 ratio Application Use the mixed UltraTech POWERGROUT NS2 to the prepared substrate using the appropriate pouring technique UltraTech POWERGROUT NS2 should not be vibrated with any mechanical vibrators as it is self-compacting by itself Any external vibrations will segregate the mix and there are chances of changes in the product performance from the designed properties Curing is required only for extreme climatic condition of application
Self Curing Ready Mix Plaster
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 40 Kg |
| Ideal for Use at | Internal and External wall plaster where water is shortage for curing |
| Model Number/Name | ACC Suraksha Self Curing 200 |
| Final setting time | 24 hrs |
| Initial setting time | 2 hrs |
| 100000 | Rs |
Minimum order quantity: 300 Bag
- ACC Suraksha Waterproof Plaster 200 is a ready to use cementitious waterproof mortar suitable for Internal & External plaster application. It's unique formula consists of ACC cement, well graded sand and special waterproofing and self-curing additives. Excellent water repellent property.
Natural Stone Sealer
Request Callback
₹ 1000 / Litre Get Latest Price
Product Brochure
| Packaging Size | 1 liter |
| State/Form | Liquid |
| Packaging Type | Bottle |
| Weight | 7.22 lbs |
| Active Contant | 54% |
| Total Soloid | 54% |
| Flash Point | More Than 100 Deg F ( More Than 38 Deg C) |
Minimum order quantity: 50 Litre
Assisted by our team of dexterous professionals, we are affianced in offering an extensive gamut of Stone Water Sealer.
like SS Back Coat, SS Color X, SS Color X Enhancer , SS Solv etc
Other Details:
like SS Back Coat, SS Color X, SS Color X Enhancer , SS Solv etc
Other Details:
- Stone shields color enhancer is use for stones for matte finish, wet look
- Excellent weather resistant product with long-lasting effect
- Keeps the stone Breathable
- Especially suited for rough, matte finish, absorbent natural and cast stones
- Wet look Sealer for interiors and Exteriors use over Marbles, Granites, Sandstones, Kotah, etc.
Silico Plast SprayPlaster
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 40 Kg |
| Ideal for Use at | time saving |
| Model Number/Name | silico |
| Model No/Name | 2045 |
| Country of Origin | Made in India |
Minimum order quantity: 40 Kg
Mcon Magic Coat Black
Request Callback
Get Latest Price
Product Brochure
| Brand | mcon |
| Available Colour | Black |
| Packaging Size | 20 L |
| Country of Origin | Made in India |
| 200 | rs |
MCON Magic Coat Black is a bitumen-based waterproofing coating designed to protect surfaces from water and moisture. It's a cold-applied, liquid membrane, formulated with a blend of special acrylic resin, bitumen, and water-repelling fillers. This makes it highly resistant to oxidation, UV light, and ozone, and it doesn't crack. It's known for its superior wetting and adhesion properties, ensuring a durable bond and long-lasting protection. Key features and benefits of MCON Magic Coat Black:
- Waterproofing: Creates a durable, water-resistant barrier, ideal for foundations, basements, and roofs.
- Bitumen-based: Offers excellent protection against water penetration.
- Cold-applied: No mixing or heating is required, saving on labor costs.
- Resistant to weathering: Highly resistant to oxidation, UV light, and ozone.
- Durable: Superior wetting and adhesion properties ensure a long life and resistance to cracking, peeling, and chipping.
- Versatile: Suitable for concrete walls, metal surfaces, bridges, and basements.
Fosroc Renderoc S2
Request Callback
Get Latest Price
Product Brochure
| Application Area | structural repairs |
| Brand | Fosroc |
| Form | Powder |
| Packaging Size | 25 kg bag |
| Coverage | Approx 2100 kg/m3 |
| Usage/Application | Repers |
| Packaging Type | bag |
| Shelf Life | 12 month |
| 2000 | Rs |
Minimum order quantity: 10 Bag
For the reinstatement of concrete in small localised patch repairs. Renderoc S2 is alkaline in nature and will protect embedded steel reinforcement. It is specially designed for location where high compressive strengths are required. The mortar is suitable where superior resistance is required to chlorides and carbon dioxide. Advantages High strength Can be applied by hand, like conventional mortars Extremely low permeability provides maximum protection against carbon dioxide and chlorides Excellent bond to the concrete substrate Shrinkage compensated No site batching required, supplied in pre-weighed prepacked condition Only addition of water at site to be made while mixing the powder and liquid parts ??? Contains no chlorides. Description Renderoc S2 is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fi llers and chemical additives and is polymer modifi ed to provide a mortar with good handling characteristics, while minimising water demand. The hardened product exhibits excellent thermal compatibility with concrete and outstanding water requirement ensures fast strength gain and long-term durability. Technical support Berger Fosroc off ers a technical support package to specifi ers, end users and contractors as well as on-site technical assistance in locations all over the country. Design criteria Renderoc S2 is designed for vertical or horizontal applications. It can be applied from a minimum of 5mm to 15mm thickness in vertical sections. Higher thicknesses can be achieved by the use of formwork. Thicker sections can be built up in layers. In horizontal locations Renderoc S2 can be applied up to 50mm thickness. The material should not be applied at less than 5mm thickness. Consult Berger Fosroc for further information. Properties The following results were obtained at a Water:Powder ratio of 0.13 and temperature @ 270C. Compressive strength 1 Day 12 N/mm2 28 Days 45 N/mm2 Flexural strength 28 days 8 N/mm2 Percentage water absorption (immersion test ) after 24 hrs 0.45 Chloride ion diff usion (Accelerated electrochemical chloride ion diff usion test ) in mg/litre After 24 hours Nil Depth of carbonation,mm ( Accelerated carbonation test) 2 hours Nil 4 hours Nil Coeffi cient of thermal expansion 7 to 12 x 10-6 / 0C Setting time Initial set 3 hrs 15 mins Final set 4 hrs 30 mins Fresh wet density Approx 2100 kg/m3 (varies depending on actual consistency) Chemical resistance The low permeability of Renderoc S2 severely retards chemical attack in aggressive environment. The cured mortar is highly impermeable to acidic gases, chloride ions, oxygen and water.
Choksey Mastergrout Cpg 1
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 5 Kg |
| Usage/Application | Construction |
| Type | pouches |
| Country of Origin | Made in India |
Minimum order quantity: 20 Kg
MASTERGROUT CPG 1 imparts non-shrink and plasticizing properties to cement when used for grouting purpose. It is an additive to cement. FEATURES / ADVANTAGE It facilities good flowable cements grout It imparts non-shrink property Higher strengths are achieved at early stage Helps to reduce permeability Increases durability It is corrosion free because it is free from chloride and iron It reduces segregation TYPICAL APPLICATION For cementitious grouting, for filling cracks, honey combs etc. Duct grouting, non-shrinks filling For joining structural elements by injection and pressure grouting Gravity grouting TYPICAL CHARACTERISTICS Nature Color Expansion Setting time : : : : Single component powder Brownish to grey powder Controlled positive expansion 1% to 4% It will not affect the normal set of cement Grouts Compressive strength: It gives higher strengths as it allows water reduction
Ready Mix Plaster
Request Callback
Get Latest Price
Product Brochure
| Construction Material Type | Powder |
| Ideal for Use at | Plastering |
| Final setting time | 10 hrs |
| Initial setting time | 60 min |
| State/Form | Powder |
| 2000 | Rs |
| Project Distributors for Construction Chemicals and Construction Materials | Dear Distributors and Suppliers in Mumbai for Construction Chemicals and materials |
Ready Mix Plaster :
Mini Order Has to be 50 bags, 100 bags, 325 bags, 625 Bags and 700 bags.
We are Project distributors for ACC brand, Bronco Brand Kaneria Brand, Ascolite brans, Ultratech brand, Walplast brand, Asian Paint brand, Birla Aerocon brand Mcon Brand etc. etc.
Mini Order Has to be 50 bags, 100 bags, 325 bags, 625 Bags and 700 bags.
We are Project distributors for ACC brand, Bronco Brand Kaneria Brand, Ascolite brans, Ultratech brand, Walplast brand, Asian Paint brand, Birla Aerocon brand Mcon Brand etc. etc.
Dr Fixit Repair Polymer Mortar
Request Callback
Get Latest Price
Product Brochure
| Rapid Chloride Permeability | 1 |
| Water Permeability | o |
| Water Absorption | 0 |
| Service Location | Mumbai |
| Packaging Size | 25 Kg |
| Type | Powder |
| Coverage Area | 6 sft / 10 mm / 25 Kg |
| Country of Origin | Made in India |
Dr. Fixit Polymer Mortar HB REPAIR PRODUCTS Description Dr. Fixit Polymer Mortar HB is a ready-to-us repair mortar, composed of Cement, properly selected & graded fillers, polymers, additives with specially designed acrylic fibers. It is available in powder to be mixed in a definite quantity of water for application. It is used for repairs of structural members of residential, commercial & industrial buildings. It produces a dense, high strength repair mortar, with excellent bond characteristics to steel reinforcement and concrete. Dr. Fixit Polymer Mortar HB Mortar is shrinkage compensated, has low permeability, extremely durable, chloride free and contains no metallic aggregate. It can be trowel applied or spray applied up to thickness of 50 mm in single layer. Areas of Application £ All kinds of repair for structural members of – Industrial, Commercial & residential buildings. £ Repairs to reinforced or pre-stressed beams or columns. £ Repair of structural members subjected to repetitive loading. £ Repairs of jetties & any other structure in marine environment. Features & Benefits £ Ease of application – Easy to mix with water and apply manually by trowel . £ Shrinkage - Reduces the risk of cracking due to shrinkage compensation. £ Primer – No primer required. £ Economics – Saves primer cost, easy to apply manually becomes economical. £ Low rebound – No rebound losses hence no wastage of material during machine application. £ Permeability - Extremely low permeability, gives excellent resistance to attack by aggressive environmental elements, making it durable. £ Machine application – Applicable by spray machine increases the speed of application with less labor & energy. Application Procedure 1 SUBSTRATE PREPARATION £ It is essential that the substrate to be repaired is sound, clean and free of all contamination. £ The damaged areas of concrete to be removed should be clearly identified. The perimeter of the area should be saw cut to a depth of 10 mm and the edges cut as neatly as possible keeping the sides squares. Feather edging is not permitted and a minimum thickness of 10 mm must be maintained over the whole repair area. £ If reinforcement is exposed in the repair area, it should be cleaned to remove all the rust particles by mechanical means like metal wire brush or abrasive blasting. £ Cathodic protection to the reinforcement steel can be provided by applying Dr. Fixit Epoxy Zinc Primer to the cleaned steel bar uniformly. Severely corroded reinforcement may require replacement and the engineer must be consulted
Silico Tile Fix Adhesives
Request Callback
Get Latest Price
Product Brochure
| Strength | High |
| Material Compatibility | Ceramic |
| Chemical Resistance | Automotive Fluids |
| Country of Origin | Made in India |
SilicoTilefix is a ready-to-use, quick-curing, and slip-resistant tile adhesive suitable for both interior and exterior applications, offering a strong bond and minimizing shrinkage cracks.
Fosroc Auracast 50 Superplasticizer
Request Callback
Get Latest Price
Product Brochure
| Concrete Strength Grade | M30 |
| Grade Standard | Chemical Grade |
| Packaging Size | 200 Kg |
| 10000 | rs |
| Project Distributors for Construction Chemicals and Construction Materials | We are Distributors , Dealers and Suppliers in Mumbai for Construction Chemicals and materials |
Minimum order quantity: 200 Kg
Concrete admixture for precast concreteelements to obtain high early compressivestrength.UsesAuracast 50 is a high performance precast super plasticiserintended for applications where reduction in cycle time andearly strength are required, and it has been developed for use inPrecast concrete elements like Hollow core slabs ,Cement Tiles , Kerbstones , Edgings ,other items for gardenlandscape design ,Building blocks , bricks etcConcrete requiring high early strength without steamcuringHigh performance concreteAdvantagesLow viscosity admixture suitable for precast elements.Suitable for concrete having cement replacements andlow water cement ratio.Provides high early strength without increase in cementcontent or reduction in workability. Ideal for precast concreteproduction.Early de-shuttering will result in increased productivity.
Pvc Water Stoppers
Request Callback
Get Latest Price
Product Brochure
| Color | Black, Blue |
| Number Of Layer | One |
| Country of Origin | Made in India |
| 2000 | Rs |
PVC Water StoppersPVC Water Stopper IS 15058 Manufacturers
Deesa Flex PVC Water Stopper are flexible Plastic strips which provide a physical barrier to Water at concrete joints, mostly in basements, Water retaining structures like Water tanks, Swimming pools, structural foundations & other below ground level constructions. Water stopper are also termed as Water Bars, seals construction joints. A typical PVC water stopper have two identical half on both sides of a central bulb. These additional extensions are provided with the aim of increasing path length for water entering behind the edge of water Stopper.
Choksey Techseal RDL 911 Polysulphide Sealant
Request Callback
In building structures various (different) types of joints are designed such as Butt joints, Lap joints, Fillets Joints, Expansion joints, Control joints and Glazing joints. As the joint expand, contract or experience a shear movement, cyclic movements, sealant changes the shape accordingly, but the volume of sealant remains same. Hence, in designing the joints, it is vital that the proper width-to-depth ratio is specified so that the width of the joint is consistent with the capability of the sealant to endure daily and seasonal cycles for prolonged periods. The amount of movement in a joint is dependent on the length (span), the coefficient of linear expansion of a panel section and the temperature differential of the substrate. To achieve the long-tem, effective performance the established width-to-depth ratios are determined and are given below.
1. Surface preparation is the most important step before application of sealant to get bestresults and to avoid failure.2. The joint surface must be dry, free from dust, coatings, bituminous mastics, concretecuring agents, mold release agents, oils, greases and loose particles.3. Clean the joint surface by wire brush and sanding with emery paper.4. Remove dust by compressed air or paint brush.5. Wipe out oil and grease by solvent soaked cloth (such as Xylene, Toluene or Acetone)
BACK UP MATERIALS
Insert compressible polyethylene, polyurethane, neoprene, polyethylene butyl rod as backup material to control depth of sealant in the joint and to provide support for tooling of the sealant.
PRIMING
Select a primer suitable to the substrate and apply two coats by brush on the sides of the joints surface at an interval of 30 minutes.
Get Latest Price
Product Brochure
| Grade | Pour Grade |
| Brand | Choksey |
| Packaging Size | 6.5 kg |
| Application | Pavements & Floors, Water Retaining, Building Construction, Expansion Joints |
| Number of Components | Two Component |
| Curing Mechanism | Chemical Cure |
TECHSEAL RDL 911 is a two component sealant based on ‘THIOKOL' – Polysulphide liquid elastomer. It consists of a ‘base' compound and ‘accelerator' (Curing Agent). RDL-911 (Pour Grade) is a pourable & self leveling material used for sealing of horizontal joints only.
When the two components are mixed together prior to application, a chemical reaction is initiated which cures instantly to a firm, flexible rubber like seal with excellent adhesion to concrete, masonry, wood, glass, acrylic and PVC plastics. It is capable of withstanding repeated extension, compression & cyclic movements without the loss of adhesion and resists deterioration by weathering, sunlight, ozone, water, salt, oils and fuels. It is far superior to all the conventional joint sealing material like bitumen, mastics, metallic channels and expansion sheets. RDL-910 (Gun Grade) is a non-sag material used for sealing of horizontal, vertical & ceiling joints RDL-911 (Pour Grade) is a pourable & self leveling material used for sealing of horizontal joints only.
- Cures at ambient temperatures to a tough, elastic and flexible rubber like material
- Bonds strongly to most of the building materials with the use of recommended primers
- Durable, remains unaffected by UV rays, ozone and weathering conditions
- Excellent reparability property
- It can be over coated by waterproofing compounds
- For Sealing of expansion, contraction & construction joints in building structure such as, buildings, roof terraces & ceilings & Sealing of dynamic structural cracks where maximum movement capability is not more than 20%
- Glazing joints of window, door frame and curtain walls
- Sealing of water retaining structure joints such as, Water tank, reservoir, aqua ducts
- Sealing of joints in traffic areas such as industrial floors, and car parking areas
- Expansion joints of retaining walls
In building structures various (different) types of joints are designed such as Butt joints, Lap joints, Fillets Joints, Expansion joints, Control joints and Glazing joints. As the joint expand, contract or experience a shear movement, cyclic movements, sealant changes the shape accordingly, but the volume of sealant remains same. Hence, in designing the joints, it is vital that the proper width-to-depth ratio is specified so that the width of the joint is consistent with the capability of the sealant to endure daily and seasonal cycles for prolonged periods. The amount of movement in a joint is dependent on the length (span), the coefficient of linear expansion of a panel section and the temperature differential of the substrate. To achieve the long-tem, effective performance the established width-to-depth ratios are determined and are given below.
1. Surface preparation is the most important step before application of sealant to get bestresults and to avoid failure.2. The joint surface must be dry, free from dust, coatings, bituminous mastics, concretecuring agents, mold release agents, oils, greases and loose particles.3. Clean the joint surface by wire brush and sanding with emery paper.4. Remove dust by compressed air or paint brush.5. Wipe out oil and grease by solvent soaked cloth (such as Xylene, Toluene or Acetone)
BACK UP MATERIALS
Insert compressible polyethylene, polyurethane, neoprene, polyethylene butyl rod as backup material to control depth of sealant in the joint and to provide support for tooling of the sealant.
PRIMING
Select a primer suitable to the substrate and apply two coats by brush on the sides of the joints surface at an interval of 30 minutes.
FOSROC Proofex Primer
Request Callback
Get Latest Price
Product Brochure
| Form | Liquid |
| Packaging Size | 20 Liter |
| Usage/Application | Construction |
| Packaging Type | Bucket |
| Shelf Life | 12 Months |
| Country of Origin | Made in India |
Proofex Torchseal Primer is suitable for use in high temperature conditions, and is compatible with all grades of. Proofex sheet waterproofing membranes.
Rising Damp Proof Chemicals service
Request Callback
₹ 90 / Square Feet Get Latest Price
Product Brochure
| Packaging Size | 25 kg |
| Usage/Application | Commercial |
| Packaging Type | Bag |
| Form | Powder |
| pH Value | 5 - 6 |
| Service Type | Rising Damp Proof Chemicals service |
Get PriceRising dampness in buildings occurs when water from the ground rises up through the bricks and mortar of a building by a process termed as "capilliarity" due to the absence or failure of DPC (Damp Proof Course) at plinth level. In simple terms, the water rises up the wall of a building in the same way that oil rises up through the wick of a lamp. Older buildings are affected by rising damp to some degree or another.
The moisture will continue to rise until it reaches a height where, unless no evaporation is possible, gravity takes over and pulls it down again.
The most common forms of rising damp treatment usually involves the injection of a siliconate type chemical either in the form of solution or cream. This is usually done by drilling holes in a band around the affected wall and injecting the recommended chemical or cream solution.
The moisture will continue to rise until it reaches a height where, unless no evaporation is possible, gravity takes over and pulls it down again.
The most common forms of rising damp treatment usually involves the injection of a siliconate type chemical either in the form of solution or cream. This is usually done by drilling holes in a band around the affected wall and injecting the recommended chemical or cream solution.
Mcon Magic Coat Primer
Request Callback
₹ 335 / Kg Get Latest Price
Product Brochure
| Packaging Size | 20 ltr |
| Brand | Mcon |
| Packaging Type | Bucket |
| Usage/Application | Exterior |
| Type | Acrylic Primer |
| Shelf Life | 12 month |
| Color | White |
Mcon Magic Coat Primer is an exterior acrylic primer which is a combination of Primer and sealer, and is designed for exterior surfaces to provide best in class adhesion, resistance to alkali and primary ef orescence. MCON MAGIC COAT PRIMER It is highly user friendly and eco-friendly.
Mcon Barrier Coat Primer
Request Callback
₹ 130 / Litre Get Latest Price
Product Brochure
| Packaging Size | 20 L |
| Brand | Mcon |
| Packaging Type | Bucket |
| Finish Type | Gloss |
| 2000 | Rs |
Minimum order quantity: 20 Litre
MCON MAGIC COAT PRIMER is an exterior acrylic primer which is a combination of Primer and sealer, and is designed for exterior surfaces to provide best in class adhesion, resistance to alkali and primary efflorescence. MCON MAGIC COAT PRIMER It is highly user friendly and eco-friendly. MCON MAGIC COAT PRIMER has excellent bonding to most of the Cementitous surfaces, breathing properties, water resistance and excellent acceptance to next coat of Coating. MCON MAGIC COAT PRIMER provides excellent tackiness to the substrate and increases the coverage of MCON MAGIC COAT products.
Dr Fixit Pidicrete MPB
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 10 Ltr, 225 kg |
| Type | Liquid |
| Category | Waterproofing Coating |
| Color | White Crystal |
| Coverage | Approximately 5-7 m 2 /litre |
| Brand | Dr. Fixit |
| Form Of Chemicals | Liquid |
| Types | Waterproofing Coating |
| Grade Standard | Reagent Grade |
| Packaging Type | Can |
| Usage/Application | Construction |
It is acrylic based polymer. It is use for acrylic bonding agent between concrete to concrete works, also use for repairing RCC members as polymer mortar. It is UV resistant.
Mcon Marvel Elasto Coat
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 20 L |
| Finish | Matt |
| Color | white |
| Brand | mcon |
| Country of Origin | Made in India |
| 2000 | rs |
Minimum order quantity: 20 Litre
ELASTO COAT is an exterior acrylic elastomeric coating that offers waterproofing as well as aesthetics in a single pack.
Davco K10 Sovacryl White
Request Callback
Get Latest Price
Product Brochure
| Packaging Size | 180 gm |
| Packaging Type | HDPE Barrel |
| Application Industry | Wood working |
| Surface Of Application | Steel |
| Grade Standard | Industrial |
| Strength | Medium |
| Material Compatibility | Metal |
| Brand | Astral |
| Chemical Resistance | Acids |
Key Features:
-
Easy Application: Ready-to-use formulation allows for direct application without the need for mixing.
-
High Flexibility: Bridges cracks and remains flexible to accommodate structural movements.
-
Mould and Fungus Resistance: Inhibits the growth of mould and fungus, ensuring long-term durability.
-
UV Resistance: Resistant to ultraviolet rays, preventing degradation from sun exposure.
-
Water-Based and Non-Toxic: Environmentally friendly formulation that is safe for applicators and occupants.
Choksey Sunshield 100
Request Callback
Get Latest Price
Product Brochure
| Form | Liquid |
| Packaging Type | Bucket |
| Form of Chemical | Liquid |
| Usage/Application | Industrial |
| Packaging Size | 25 Kg |
| Country of Origin | Made in India |
Minimum order quantity: 1 Kg
DESCRIPTION SUNSHIELD-100 is a single component, 100% pure acrylic based, highly engineered, elastomeric, insulating solar reflective coating that incorporates ‘ceramic’ technology for thermal reflection and substrate insulation. Solar reflective coating is water borne, high builds formula that reflects the solar radiant heat, insulates, sound proofs, beautifies and protects the substrate. After drying it forms a film of exceptional strength and durability that gives excellent resistance to solar radiations.
FEATURES / ADVANTAGES SUNSHIELD-100 gives temperature difference from 60 C to 80 C in surface temperature. Resistance to chalking and flaking. Ultra violet resistance for outstanding durability. Available in attractive light shades, white is recommended Aesthetic appeal and protection against water and carbon dioxide penetration. Waterborne chemistry for uncomplicated handling and clean up. Suitable for brush methods of application and optimize rheology for high film build in one coat. Breathability for preventing moisture build up in walls and roofs (MICROPOROUS) Can be applied on slightly damp surfaces too. TYPICAL APPLICATION SUNSHIELD-100 is mainly designed for : Exterior RCC surfaces, masonry walls or facades. Asbestos sheets, sloping roofs, farm sheds. Water storage tanks of metal, plastic, cement etc. Warehouses, godowns, cold storages.
FEATURES / ADVANTAGES SUNSHIELD-100 gives temperature difference from 60 C to 80 C in surface temperature. Resistance to chalking and flaking. Ultra violet resistance for outstanding durability. Available in attractive light shades, white is recommended Aesthetic appeal and protection against water and carbon dioxide penetration. Waterborne chemistry for uncomplicated handling and clean up. Suitable for brush methods of application and optimize rheology for high film build in one coat. Breathability for preventing moisture build up in walls and roofs (MICROPOROUS) Can be applied on slightly damp surfaces too. TYPICAL APPLICATION SUNSHIELD-100 is mainly designed for : Exterior RCC surfaces, masonry walls or facades. Asbestos sheets, sloping roofs, farm sheds. Water storage tanks of metal, plastic, cement etc. Warehouses, godowns, cold storages.
Ascorepair CRM
X
Product Videos
Contact Us
Beena Hitendra Rathod (Office Assistant)
Venus Enterprises
Shop No.9, Raj Sundra, Near Maruti Nagar Ashok Van Shiv Vallab Lane, Dahisar East
Mumbai - 400068, Maharashtra, India
Send Email