Venus Enterprises

It is an Oil Bound distemper for Interior paints from Aditya Birla Grassim Co.
plication Guidelines a. This Product is to be used on interior masonry surfaces only. b. All aspects of surface preparation and application guidelines as detailed below and/ or available in the latest Product Information Sheet are to be strictly followed: i. The Product is to be used for vertical interior walls and interior roof masonry surfaces only. ii. It needs to be mandatorily ensured that the surface is clean and dry and all cracks are filled as a pre-painting step. iii. Before painting it needs to be mandatorily ensured that moisture level of surface is below 16%. In case of any deviation, appropriate treatment of fundamental cause of dampness needs to be carried out before painting. iv. Cracks up to 5 mm width and 3 mm depth on the surface are to be filled with Birla Opus Alldry Crack Master, applied as per instructions given in the latest PIS before application of the Product. Loose plaster, structural cracks, etc. need to be repaired as per standard construction practices

Walmasta Exterior Interior Primer

Walmasta Exterior & Interior primer is a specially formulated value for money primer which gives excellent whiteness & opacity, superior adhesion to top coat has a good resistance to chalking and is suitable for both exterior and interior walls.

Benefits

1. Easy Brushability 
2. Excellent Opacity 
3. Excellent Whiteness 
4. Resistance to Chalking 
5. Green Pro Certified 

High performance waterproof coating for all types of externally plastered concrete walls, especially for the rain lashed walls. Unlike ordinary exterior paints, it provides dual benefit of aesthetics with waterproofing property to external walls.

Premium Matt is a premium interior paint with a rich matt finish. It’s inherent deep matt effect and carefully selected pigments provide unsurpassed color depth and brilliancy even in the most difficult lighting conditions. Premium Matt’s ability to hide surface defects leads to an even and consistent f inish even at sharp angles. The paint is extremely resistant to burnishing and mechanical abrasion making it suitable for even the most demanding high traffic interior spaces. Being highly breathable, it is extremely resistant to peel-off and blistering. Designed for excellent dirt release, it is easily washable and highly scrub resistant. Available in a wide range of colours.

urface must be dry and free of contaminants, including previously applied sealers, dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.  Clean the surface with ample water or with suitable cleaners.  Once the area has completely dried, proceed with the sealing of the surface for water and stain resistance.  Apply StoneShield TOP COAT to the entire surface also covering the grout with a paint brush. Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. Be careful not to allow the sealer to puddle or dry.  Repeat the above step for a second coat of the sealer. Please note that if the first coat is applied properly very less material will be required in the second coat. Light buffing may be required to even-out/remove the excess sealer and wipe of the brush marks if any.  Avoid traffic on the surface for 24-72 hours. In case, traffic is unavoidable, cover the surface with a porous cloth or mattress.  After the prescribed time the surface is ready to use

Textured, easy-to-clean, optimal design elements and floors that never skimp on performance. These color quartz broadcast systems are a cost-effective option for manufacturing areas and commercial spaces. Discover the unlimited design capabilities available in various finishes, patterns and colors.

Bituminous Anti-Corrosive Multi-purpose Aluminium Coating Description SuperSilverShield® is an anti-corrosive, water proofing paint with aluminium finish SuperSilverShield® is composed of oxidized bitumen, solvents and specially formulated aluminum compound. Characteristics Finish Silver Drying Time, hr 5 DFT / coat, Micron 30 to 40 Specific Gravity 0.96 Theoretical Coverage*, m2 / L • On metal and old painted surfaces • On bituminous surfaces • On brick masonry and concrete 10 ± 1 8 ± 1 6 ± 1 Consistency Smooth, Uniform, Brush-able * Depending on surface condition Application SuperSilverShield® is used as a protective coating on iron, steel, masonry and other surfaces. Advantages • Deflects UV rays and thus prevents degradation of membrane due to exposure to sunlight. • Facilitates heat insulation. Application Methodology ??? Surface Preparation • Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface before applying SuperSilverShield®. • Undercoat is not necessary for its application. ??? Material Preparation • Stir SuperSilverShield® by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure thorough dispersion of aluminium for a uniform finish. ??? Application of Material • Apply SuperSilverShield® on the prepared surface by brush. • Allow it to dry for 5 hr. • SuperSilverShield® can be applied over old painted surfaces without burning off or scraping, provided the old surface is not in a flaky condition. Health & Safety • Avoid contact with skin / eyes and avoid swallowing. • Ensure adequate ventilation and avoid inhalation of vapour. • Wear suitable protective clothing, gloves and eye protection. • In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area. • In case of eye contact, wash with plenty of clean water and seek medical advice. • If swallowed, seek medical attention immediately. Do not induce vomiting. Packing Available in 20 L drum. Storage Store in air tight containers in cool, dry place, under shed, away from heat and moisture

Xtend Ultra is a high performance paint for exterior application. Made using only lightfast inorganic pigments it offers a service life of 10+ years without fading or peeling. Its combination of  a proprietary oragno-silicate binder design and unique fillers offer excellent dirt pickup resistance. Its inherent breathability and water impermeability naturally inhibits algae and fungal growth. Xtend Ultra has a mineral matt appearance that enhances light reflectivity and effectively hides surface defects. Available in 59+ durable shades.

Natural Look Penetrating Sealer for:    Uses:  All types of Natural Stone like Sandstone, Marble, Granite, Travertine, Slate, Satillo. Composite Marble, Engineered Stone, Clay Tiles, Bricks, Masonry, Plastered Walls, Cement etc… Grouts Interior & Exteriors, Floorings, Claddings, Dados, Kitchens, Showers, Restrooms, Pool Areas, etc… Special Features:         Unique hydrid system which maintains the natural look of the surface and keeps it breathable.  Does not form a film. Solvent based formula penetrates deep into the surface giving maximum life.  Non-yellowing. Protection against water and oil based stains,  Dirt & Dust repellant.  Anti-fungus, mould, mildew, etc… Salt resistance, acid resistance, weather resistance, freeze/thaw resistance.  Directions for Use:         Notes:      Surface must be dry and free of contaminants, including previously applied sealers, dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.  Clean the surface with ample water or with suitable cleaners.  Once the area has completely dried, proceed with the sealing of the surface for water and stain resistance.  Apply StoneShield TOP COAT to the entire surface also covering the grout with a paint brush. Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. Be careful not to allow the sealer to puddle or dry.  Repeat the above step for a second coat of the sealer. Please note that if the first coat is applied properly very less material will be required in the second coat. Light buffing may be required to even-out/remove the excess sealer and wipe of the brush marks if any.  Avoid traffic on the surface for 24-72 hours. In case, traffic is unavoidable, cover the surface with a porous cloth or mattress.  After the prescribed time the surface is ready to use.  Before sealing any surface, test several inconspicuous test patches to assure maximum performance. Client has to determine the suitability of the product for the intended use and StoneShield stands no Warranty for its performance for improper application methods otherwise only if done by authorized and certified StoneShield applicators. Coverage of the product will depend on porosity of the stone and StoneShield stands no Warranty if porosity of stone not saturated by improper application or less application of material. For any warranty related matters coverage should be certified by StoneShield with documentary evidence with respect to it. To protect adjoining areas, masking tapes to be used for the surface area to be sealed.  Store StoneShield TOP COAT in the original container, properly sealed to avoid contamination and solvent evaporation. Stored at 40 C (77 F), StoneShield TOP COAT will have a shelf life of 24 months. Pack Sizes – 500 ml, 1 Litre, 5 Litres, 20 Litres Emergency First Aid Procedure: Ingestion - Do not induce vomiting. Call a physician. Eye Contact – Flush thoroughly with water for at least 15 minutes. Call a physician if eye irritation persists. Launder affected clothing before re-wearing. Inhabitation – Move to fresh air, call a physician if respiratory irritation persists.