Venus Enterprises

MCON STEEL RR is a rust treatment which helps in removing adamantly adhering rust . MCON STEEL RR removes the loose rust without losing the strength of metal. Features & Benefits :- Performs rust removal and rust prevention in one operation in mild conditions. MCON STEEL RR Areas of Application :- Reinforcement Bars Bridges Steel-Pipeline Structures Improves bond strength of steel with Concrete. Treatment can be carried out at site. Self-curing. 

High Build, Chemical Resistant, Bituminous Waterproof CoatingT-GUARD® BC coating is based on raw materials which are amongst the most water and water-vapour resistant surface coating materials available. They are also resistant to a wide range of chemical attack.Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose.T-GUARD® BC incorporates fibres which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.Uses Horizontal and vertical damp-proof membranes in sandwich construction for floors, walls and roofs. Internal lining of water storage tanks including for potable water. External treatment of below ground structures against water ingress and attack by aggressive ground water.

Apcorep Monopol is solvented anti-corrosive coating which restrains entry of chemical intrusions like chlorides, CO2, moisture, water, UV radiations and helps in delaying the initiation period of corrosion significantly which increases durability of the concrete structure. It alsoe xhibits crack bridging ability and biological resistance without compromising on the aesthetic features.

Dr. Fixit Rust Remover is based on chloride free chemical & additive solution in water. it is used as rust remover which effectively cleans rust from steel surfaces, before application of any protective coating. Typical Applications } On re-bars during repairs to reinforced concrete structures. } Maintenance of mild steel structures like tanks, water pipelines, shuttering plates and other corroded steel surfaces. Features } Ease of application - Ready to use, easily applicable by brush. } Penetration & effect - Effective rust removal even from areas difficult to reach & penetrate. } Chloride free - Contains no chloride hence no chance of enhancing further corrosion. } Economical - Cost effective because of good coverage. Packaging 500 ml & 1 litre Method of Application 1 SURFACE PREPARATION } In case of heavy rusting of steel reinforcement, M.S. pipelines, M.S. plates or any other M.S. surface, remove the loose rust by wire brushing, chipping, hammering or grinding so that majority of rust scale is removed. 2 APPLICATION } Apply Dr. Fixit Rust Remover on affected surface by using cotton waste swab or by brush application. Leave the surface to react with Dr. Fixit Rust Remover for at least 15 to 30 minutes. } The rusty surface will change its colour to original blackish steel, remove the same with cotton cloth. } Then remove the loose rust particles by scrubbing or simple dusting with the brush. } Wash the steel surface with water jetty to remove all the acidic residue left on the bar, and clean with cotton cloth. 3 FINISH } When applied over corroded reinforcement steel, wash the surface with clean water before taking up further work of repairs. Precautions & Limitations } Dr. Fixit Rust Remover is acidic in nature, when applied to clean the rusted rebars. Ensure that traces of acid are removed completely by washing with a water jet, before applying coatings or primers. } For thorough removal of rust and cleaning steel bar to SA 2 1/2 standards, sweep blasting is recommended.

SmartCare APCOREP Anti Carbonation Coating in a elastomeric, anti-carbonation, anti-corrosive, UV resistant and water based aliphatic acrylic coating system.